JVC DLA-X30, DLA-X90R, DLA-X70R Installation, Keystone, Anamorphic, Screen Adjust, Black Level

3 Operation

Adjustments and settings in the menu (continued)

[3] Installation

Use this function to set and adjust installation method and projection environment.

Use the UP/DOWN keys to select an adjustment item. Press the [BACK] key to return to the previous screen.

Lens Control

Pixel Adjust

Installation Style Front

Keystone

AnamorphicOff

Screen Adjust

Black Level

Items		Explanation, operation, precautions, settings
Lens Control		To sub-menu"[3-1] Lens Control"
Pixel Adjust		To sub-menu"[3-2] Pixel Adjust"
Installation Style		Matching the state of the projector’s projection, one can switch horizontal and vertical flip /
		forward switch.
		Settings: Front, Ceiling Mount (Front), Rear, Ceiling Mount (RE)	[Front]
	Front	Front upright projection mode.
	Ceiling Mount (F)	Ceiling/front projection mode.
	Rear	Rear upright projection mode.
	Ceiling Mount (R)	Ceiling/ rear projection mode.
Keystone		In regards to the projection plane, any occurring keystone distortion is adjusted in case
		the installation location is inclined.
		(*) There may be instances, when the video image - after having corrected keystone
		distortion - will not match the screen. The position with a shift correction of 0% position is
		an exception.
		(*) When there is a 3D input signal, adjustment is not possible.
	Horizontal	Adjusts the horizontal keystone.
		Settings: -40 to 40	[0]
	Vertical	Adjusts the vertical keystone.
		Settings: -30 to 30	[0]
Anamorphic		The video images are projected after being enlarged in the vertical direction of the panel
		resolution. This setting is used when one uses the anamorphic lens to enlarge them in the
		horizontal direction.
		If a 3D signal is fed in when Anamorphic mode is set to A or B, Anamorphic mode is
		automatically turned Off.
		Settings: A, B, Off	[Off]
	A	Video with an aspect ratio of 2.35:1 is enlarged in the vertical direction of the panel
		resolution and then projected.
	B	Video with an aspect ratio of 16:9 are displayed by reducing them in the horizontal
		direction, without changing their size in the vertical direction.
	Off	Used when watching video images other than those with a 2.35:1 aspect ratio while using
		an anamorphic lens. 2.35:1 video images are projected without any changes. (Black
		bands appear on all sides)
Screen Adjust		It corrects the white balance fault according to the reflective properties of the projection
		screen. Please adjust to your preference.
Black Level		Sets the black level when used indoors.
		Settings: 0 to 10	[0]

The frame is displayed in the center as shown in the figure on the right. (Resolution is emphasized in this figure and is not a true representation.) The actual black that can be

displayed by this machine is shown in the right frame. Adjust so that the borderline shared with the left frame does not stand out.

(*)This adjustment decreases shading, making fine adjustments from the black (dark) side to the white (bright) side. Adjust settings according to your preference.

64