JVC DLA-X70R, DLA-X30, DLA-X90R, DLAX70 manual Replacing the Lamp, Lamp replacement procedure

4 Maintenance

Replacing the Lamp

The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit.

●When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the indicator. (Reference page: 17 to 18, 86)

CAUTION

● Do not insert your hands into		Lamp replacement procedure
the opening of the lamp!		1
This could cause obvious			Remove the power plug from the
deterioration of the
equipment’s function, wounds			outlet
and electric shocks.		2
● Do not replace the lamp			Remove the lamp cover
immediately after the unit has
been used, and allow a cooling			● Remove the screws with a	screwdriver.
period of 1 hour or more before
replacement. The temperature
of the lamp is still high and this
may cause a burn.
● Do not apply shock to the
lamp unit. It may cause lamp
blowout.
● Do not use flammable air duster
to clean the internal parts of the
unit. This may cause fire.		3 Loosen the screws on the lamp unit
	MEMO
			● Loosen the screws with a	screwdriver.
Usable Lamp Life
● When using the “Lamp Power”
set at “Normal", the lifetime of
the lamp will be approximately
3000 hours.
This is an average lifetime and
cannot be guaranteed.
● The lamp life may not reach
3000 hours depending on the
operating conditions.
● When the lamp has reached
the end of its usable life,
deterioration progresses
rapidly.		4 Pull out the lamp unit
● If the picture becomes dark,
the tint becomes strange, or			● Grasp the handle and pull out the lamp unit.
the image flickers, promptly the
lamp unit for a new one.
Purchasing the Lamp Unit
Please consult your authorized
dealer.

■Lamp Unit

Part No.: PK-L2210U

Handle

78