JVC DLA-X30, DLAX70 Connecting via Trigger Cable, Connected by RS-232C connection cable, Terminal

2 Preparation

About the connection (Continued)

■Connecting via Trigger Cable

This unit

STANDBY/ON

		INPUT	Screen
1 HDMI	2
		OK
RS-232-C	CR/PR CB/PB Y
SYNCHRO	PC	TRIGGER CONToROL Trigger output terminal
3D		REMOTE

MENU BACK

Trigger cable

(sold separately)Trigger input terminal ( Φ 3.5)

CAUTION

●Do not supply the power to the other devices.

●Do not connect audio terminals of the other devices such as headphones etc. Otherwise, this may cause a malfunction of the other devices or injury.

●Using beyond the rated value will cause malfunction.

●Exercise adequate caution to prevent short circuit as the trigger terminal outputs a voltage of 12V.

●The default is set to "No output". Please set it under the item "Trigger" of menu [5] "Function". (Reference page: 72)

■Connected by RS-232C connection cable

This unit

1 HDMI 2

STANDBY/ON

INPUT

OK

	CR/PR	CB/PB Y
3D		REMOTE
SYNCHRO	PC	TRIGGER CONTROL

MENU BACK

RS-232C connection cable (sold separately)

RS-232C

terminal

32