JVC DLA-X70R, DLA-X30, DLAX70 Horizontal, Vercital V10 H10, Pixel Adjust Zone Adjust Red, Position

3 Operation

Adjustments and settings in the menu (continued)

See Pixel Adjust Flow and Operation: Zone Adjust

After making overall adjustment for error across the entire screen, proceed to fine-tuning. The screen can be divided vertically and horizontally into 10 sections to make adjustments. Press the [PIC ADJ] button on the remote control to display the [Zone Adjust Window]. Or, from the main menu, set the [Adjust Area] to [Zone] and select [Adjust Color] and [Adjust Pattern], then move the cursor to [Adjust(Fine)] and press the [OK] button on the remote control to display the adjust pattern and the zone adjust window.

(*) The range of adjustment may narrow depending on the adjust amount of the entire screen.

Zone cursor

Zone Adjust Window

	Pixel Adjust
Zone Adjust
		Red

		Position		8 / 5
			H - 31
			V - 7
				Select
Color A.	ADJUST.	Color P.	A. Area	BACK
GAMMA	COLOR.	COLOR.	PIC.	Operate BACK
	TEMP	P.FILE.	ADJ.
H0				H (Horizontal)

V0

Adjust Pattern

Vercital

V10

H10

Use the [UP], [DOWN], [LEFT], and [RIGHT] buttons to move the cursor to the position you want to adjust. Press the [OK] button on the remote control to enter the adjust operation mode. Use the [UP], [DOWN], [LEFT], and [RIGHT] buttons to move and adjust pixels in the vertical and horizontal directions within the zone. The adjustment settings appear in the center of the Zone adjust window along with the cursor position. Use the [BACK] button to exit the adjust operation mode.

		Zone Adjust window
Pixel adjust setting			Pixel Adjust
	Zone Adjust				Red
			Position		8 / 5
				H - 31
				V -	7
Remote Control					Select
Operation Guide
	Color A. ADJUST.		Color P.	A. Area		BACK
(Reference page: 68)	GAMMA	COLOR.	COLOR.	PIC.	Operate	BACK
		TEMP	P.FILE.	ADJ.

Adjust Color

cursor-position

Adjust setting

70