Changing the Display (MX-V608T/MX-V688T)
The display normally indicates each source, but it can be switched to the clock time.
Press DISPLAY.
Each time you press the button, the source and the clock time are shown alternately on the display.
j 
Source (example) | Clock time |
The clock indication can be interchanged with the source indication using the Unit or remote control.
The clock indication may change to source indication depending on the operation of the Unit.
Listening to Auxiliary Equipment
By playing the sound from auxiliary equipment through the System, you can gain control over how the music or program sounds. Once the connected equipment is playing through the System, you can apply the sound effects.
First make sure that the auxiliary equipment is properly connected to the System. (See page 6).
1.Turn down the volume level to 0.
2.Press AUX.
or | “AUX” appears on the display. The AUX button on the Unit lights up. |
AUX |
|
English
COMPU PLAY
When AUX is pressed while the power is on standby, the power is automatically turned on.
3.Start playing the equipment.
4.Adjust the volume level to the desired listening level.
5.Select a Sound Mode, if you wish.
To cancel the setting
Change the source by starting any one of the System’s
13
