JVC CA-V908T, SP-V608 Using the Tuner, Tuning in a Station, Setting the AM Tuner Interval Spacing

English

Using the Tuner

	PROGRAM
	/RANDOM
DISC
	REPEAT
DISC	SET
DISC

MULTI CONTROL

FM/AM

When FM or AM is selected as the source, the button lights up.

DISC 1		DISC 2		DISC 3
PRO LOGIC		3CH LOGIC TEST TONE			SLEEP
–	CENTER		+	ONSCREEN SOUND		Number buttons
	LEVEL			CENTER MODE MODE
–	REAR		+	V.INTRO	FM MODE
						FM MODE/ECHO
	LEVEL			DELAY TIME	/ECHO
				HIGHLIGHT	FM/AM
L BALANCE R				S.A.BASS		FM/AM
					RECPAUSE	Display
SHIFT A		TAPE A		TAPE TAPE B	AUX
SHIFT B				SELECT	STILL
FADEMUTING				RETURN CD REPEAT
+					NEXT

VOLUME MULTI CONTROL

– PREV

KEY CONTROL

Band display, Frequency display, Preset channel

When the System is being used, the display shows other items as well.

However, we have only shown the items described in this section.

You can listen to both FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage.

Before listening to the radio:

• Check that both the FM and AM antennas are firmly connected. (See page 4.)

Setting the AM Tuner Interval Spacing ——————————

+	Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. Europe, the U.K.,
	Australia, and some other areas use 9 kHz spacing, while Canada, the United States, and some other
	Western Hemisphere countries use 10 kHz spacing.
		To select the 10 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
		while holding down TUNING UP on the MULTI CONTROL. “AM --10” appears on the display.
		To select the 9 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
		while holding down TUNING DOWN on the MULTI CONTROL. “AM -- 9” appears on the display.

Tuning in a Station

Press FM/AM to turn on the radio.

or FM/AM The frequency of the previously selected channel appears on the display.

18