Right Side

I

DVI 1

 

DVI 2

 

CONTROL

 

USB

 

DVI 3

 

LAN

 

 

OPERATE I/B STANDBY/ON

 

LAMP

DVI 4

WARNING

RS-232C

 

JKL MNO P Q R

I[DVI 1 to 4] Terminal

This is an input terminal for video signals. Connect it to the video output terminal of the computer.

(A Page 21, 23)

J[USB] Terminal

Enables control of this projector by connecting it to a computer.

K[LAN] Terminal

Enables control of this projector using a computer that is connected to the network.

L[RS-232C] Terminal

This is the RS-232C interface-specific terminal. This projector can be controlled by connecting it to a computer using a RS-232C cable.

O[LAMP] Indicator

This indicator lights up in yellow when the lamp time exceeds 1900 hours.

NOTE:

●For details on indicator displays during warnings, refer to AWarnings Using IndicatorsB. (A Page 54)

●A lamp life message appears when the lamp time has exceeded 2000 hours.

(A Page 53)

PAC Power Input Terminal

Connect the supplied cord to this terminal.

QMain Power Supply Switch

Use this to turn ON/OFF the main power supply of the projector unit.

M[OPERATE I/B] Button

Pressing this button for one second or longer when in the standby mode (main power supply is ON) turns on the power of the projector unit. Pressing it for one second or longer when the power is ON switches the projector to the standby mode.

N[WARNING] Indicator

This indicator lights up in red when abnormality occurs on this projector. For details, refer to AWarnings Using IndicatorsB. (A Page 54)

R[STANDBY/ON] Indicator

Lit (Red)

: When in the standby mode.

Lit (Green)

: When power is supplied.

Blinking (Red)

: When cooling down (cool down mode).

 

(A Page 31)

Blinking (Green) : When the projected image is temporarily hidden. (A Page 31)

NOTE:

●For details on indicator displays during warnings, refer to AWarnings Using IndicatorsB. (A Page 54)

13