(10) Admin.Signal Menu (Cont’d)
indicates the factory default.
Item | Setting Value |
| Description | |
Signal Status |
| Displays information on the input signals. Same as ASignal StatusB in the | ||
DVI | ^ | User Menu. |
| |
DVI | : Displays the DVI input terminal number. | |||
Rate(Hz) | ^ | |||
Rate(Hz) | : Displays the vertical frequency. | |||
Pixel H | ^ | |||
Pixel H | : Displays the horizontal resolution. | |||
Pixel V | ^ | |||
Pixel V | : Displays the vertical resolution. | |||
Link | ^ | |||
Link | : Displays the link status of the DVI terminal. | |||
| ||||
|
| |||
|
| NOTE: |
|
|
|
|
|
|
|
|
|
| |
|
| ● This item is not displayed when there is no signal input. |
| |||
|
| ● The text color of Rate (vertical frequency) turns red in the case of |
| |||
|
| interlaced signal. And the text turns white in the case of progressive |
| |||
|
| signal. |
|
| ||
|
|
|
|
| ||
|
|
|
| |||
Display Mode | Signal | For specifying the display mode of the projection screen. Same |
| |||
| Double | configuration as ADisplay ModeB in the User Menu. |
| |||
| Signal | : Displays input signals on a single screen. |
| |||
| Cross |
| ||||
| Double | : Displays two different input signals on two screens. The |
| |||
|
|
| ||||
|
|
|
|
| left screen displays images of the DVI1 terminal, and the |
|
|
|
|
|
| right screen displays images of the DVI3 terminal. |
|
|
| Cross | : Displays four different input signals on four screens. |
| ||
|
|
|
|
| The top left screen displays images of the DVI1 terminal, |
|
|
|
|
|
| the top right screen displays images of the DVI2 |
|
|
|
|
|
| terminal, the bottom left screen displays images of the |
|
|
|
|
|
| DVI3 terminal, while the bottom right screen displays |
|
|
|
|
|
| images of the DVI4 terminal. |
|
|
|
|
| |||
EDID | ^ | For rewriting EDID. |
| |||
|
| Click the ABrowseB button and select an EDID file. |
| |||
|
| Click the ASETB button to start writing. |
| |||
|
| Write AOKB will be displayed for each channel. “NG (number)” is displayed |
| |||
|
| when writing fails. |
| |||
|
| Error Code |
|
| ||
|
| 1: System error |
|
| ||
|
| 7: Unable to execute due to power off |
| |||
|
| 8: Unable to rewrite due to DVI cable connection |
| |||
|
| CAUTION: |
|
|
| |
|
|
|
|
| ||
|
| ● Do not turn off the power during rewrite. |
| |||
|
| ● The EDID file capacity is within 256 byte. |
| |||
|
| ● Rewriting to individual channel is not available. |
| |||
|
| ● It is not possible to move on to other pages during rewrite. |
| |||
|
| NOTE: |
|
|
| |
|
|
|
|
| ||
|
| ● EDID: Extended Display Information Data |
| |||
|
| A data to describe the specifications (resolution, model number, etc.) of |
| |||
|
| the projector. The compatible transmitting device will output the |
| |||
|
| optimum video signal based on this data. |
| |||
|
|
|
|
|
|
|
50