Assigning IP Address from the DHCP Server
The IP address is automatically assigned by the DHCP server.
1 After connecting, turn on the main power
●Refer to Page 24 on the details of connection.
●Refer to Page 25 on procedures to turn on the main power.
2 Set the ADHCP ClientB setting of this projector to ADHCPB
●The ADHCP ClientB of this projector is set to
ASTATIC IPB (the DHCP client function is OFF) by default. When assigning an IP address from the DHCP server, access this projector from the
computer to alter the settings. For details on the setting procedures, refer to ASetting (Changing) the IP address of this projectorB. (A Page 27)
NOTE:
●Please consult the network administrator on the IP address assigned to this projector.
●When ADHCP ClientB is set to ADHCPB, and if the projector is started up in a LAN where a DHCP server does not exist, the projector will start up using the default IP address instead.
CAUTION:
●Configure the DHCP server such that the same IP address is assigned to the AMac AddressB of this projector by the DHCP server at all times. Connection may fail if the above setting is not performed.
Connecting this projector and the computer using a USB cable
You can connect this projector and the controlling computer using a USB cable.
●You need to install a driver in order to connect the projector and computer using a USB cable.
NOTE:
●For details on the installation of the USB driver, please consult your authorized dealer.
Using the Mail Delivery Feature
This feature enables delivery of mail (error message) to the preset
Connection Example (When DHCP Server is Used)
ADSL modem, etc.
To Internet Connection
ETHER
LAN
WAN | LAN1 LAN2 LAN3 LAN4 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DHCP Server
To LAN Terminal
29