What to do when these messages are displayed
Messages are displayed when the lamp life has expired and when there is input of signals that cannot be used.
Message
Lamp Time Over
Message | Cause (Details) | |
|
| |
| ● Displayed when the lamp time has exceeded 2000 hours. | |
| The message is displayed for a period of 3 minutes during each | |
Lamp Time Over | projection. | |
Replace with a new lamp unit. | ||
| ||
| For details on replacement of the lamp unit, please consult your | |
| authorized dealer. | |
|
| |
| ● When there is input of video signals that cannot be used with this | |
Out of Range | unit | |
| Input video signals that can be used. | |
|
| |
| ● When no device is connected to the input terminal | |
No Input | ● When the input terminal is connected but there is no signal | |
| Input the video signals. | |
|
|
NOTE:
●The messages will not be displayed under factory default conditions.
●Set AMessage DisplayB in the Option menu to AONB. (A Page 41)
53