Network Settings

IP Address Settings

Set the IP address for this projector. There are 2 methods to set the IP address.

Assigning a static IP address

Assigning an IP address from the DHCP Server

Assigning a static IP address

The AIP Address SettingB of this projector is set to ASTATIC IPB (the DHCP client function is OFF) by default. Upon turning on the power, this projector starts running with the following IP address.

IP Address

: 192.168.0.2

Subnet Mask

: 255.255.255.0

Default Gateway

: 192.168.0.254

IP address setting at the computer

Set the computer to an IP address that enables communication with this projector.

1

2

3

Click AStartB and select AControl PanelB

Double click ANetwork ConnectionsB

Right-click on ALocal AreaB and select APropertiesB

●Check to ensure that the AClient for Microsoft NetworksB and AInternet Protocol(TCP/IP)B check boxes are selected.

4 Select AInternet Protocol(TCP/IP)B and click APropertiesB 5 Set the IP address

A Select AUse the following IP addressB

B Set AIP addressB

(For example, use 192.168.0.100 when DLA-SH7NL is in its default settings)

NOTE:

●Make sure that you take note of the original IP address before altering.

●When setting, ensure that a duplicate IP address is not used within the same network environment.

C Set ASubnet maskB

Set to a value that is appropriate for the setting operation. Clarify with the network administrator if you have any queries. (Use 255.255.255.0 when the camera is in its default settings)

DWhen a ADefault gatewayB is present, make use of the IP address (e.g., 192.168.0.254)

EClick AOKB

6 Click AOKB on the ALocal Area Connection PropertiesB screen

26