JVC DR-MH300BE, DR-MH300SE Channels, Setting Receiving, H Exit setup, E Select “EDIT”, G Set the channel, C Select “TUNER SET”, A Access the setup menu, D Select “MANUAL CH SET”

Setting ReceivingChannels

9￿Usually performed automatically using auto setup or preset download. If cannot be set automatically in some regions, set them manually.

G

B - G

F

F - H

RETURN

A, H

IMPORTANT:

........................................................

0If channel settings are performed manually, the

SHOWVIEW guide channel will not be set. See ASHOWVIEW Guide Channel SetB [ P38].

A Access the setup menu.

B Select “INITIAL SET UP”.

C Select “TUNER SET”.D Select “MANUAL CH SET”.

SELECT

MANUAL CH SET

CONFIRM

0The AMANUAL CH SETB screen will be displayed.

E Select “EDIT”.

SELECT

CONFIRM

EDIT

F Select a channel that you want to set. 0 A confirmation screen will be displayed.

G Set the channel.ASelect and confirm on ABANDB.

SELECT

BAND	CH
CH	2
ID	----
FINE
DECODER	OFF
CONFIRM	RETURN

0ACHB is a regular broadcast band, and ACCB is a cable broadcast band.

BSelect and confirm on ACHB.

0Select a receiving channel.

CSelect and confirm on AIDB.

0Select from the ATV Station and ID ListB [ P104].

0 See AEntering the Station IDB [ P37].

DSelect and confirm on AFINEB.

0If the reception is poor, press the Selection Keys (FG) to fine-tune.

ESelect and confirm on ADECODERB.

0When a decoder is connected, set to AONB.

0Unable to change the setting other than the

following.

Setup Menu AL-2 SELECTB = ADECODERB

[ P103] l

H Exit setup.

0If RETURN is pressed, you will return to the previous screen, and other channels can also be set.

36H EN