JVC DR-MH300BE, DR-MH300SE Switching the Image Output Format, A, B, C Confirm, When HDMI is connected, B Select the output format, When HDMI is not connected, ENTER, [ P88]

Switching the Image Output Format

ABCDEFGHIJK

9￿This unit has an HDMI terminal that connects digitally with the monitor.

HDMI can be easily connected using just one cable. Moreover, you can enjoy high image and high sound quality as the video and audio signals are output as digital signals.

9￿Up converting to increase the image resolution, and progressive scanning without flicker are possible.

C

A, B

IMPORTANT:

........................................................

0Use this function if connected to a compatible TV using the HDMI terminal or component video terminal.

0If connected to the TV using the SCART connector, set to A576iB.

0If the HDMI connection is not used, the screen may not be displayed depending on the setting of the output format. Set the output format again while checking the front display panel.

0The resolution automatically switches when timer recording begins while watching in A1080iB/A720pB. During which, the picture may be distorted or may not be displayed.

0It is not possible to change the output format while the Playback Setting Menu is being displayed. Clear the Playback Setting Menu, then change the output format.

Output Format

On-screen	Front Display Panel
Display
AOUT:AUTOB	AOUT AUTOB	Depend on the format
		being set.
AOUT:576iB	AOUT 576IB	q off
AOUT:576pB	AOUT 576PB	q on
AOUT:1080iB	AOUT 1080IB	q off
AOUT:720pB	AOUT 720PB	q on

A Display the output format.

More than 5 seconds	0 The current output
	format will be displayed
	on the front display
	panel.

B Select the output format.

0You can also select using the Selection Keys (FG).

0Some items may not be selectable depending on the operating status.

C Confirm.

CONFIRM

0If select using the Selection Keys (FG), it will be cancelled if ENTER is not pressed.

It will be confirmed if select using OUTPUT FORMAT.

0The output format set will be displayed on the front display panel for 5 seconds.

Conditions for up converting (Output using A1080iB, A720pB)

Only during playback of programme titles. Up convert will be cancelled in the following cases. Returns to the original output when playback begins.

0During recording (including temporary recording. See

ATemporary RecordingB [ P88].)

0During on-air image display

0During Library Database Navigation operation

0During editing

0During dubbing setup or dubbing

0When Setup Menu is displayed

0When HELP screen is displayed

0During programme navigation

0During Video CD, CD, JPEG and MP3 playback

When HDMI is not connected

0AAUTOB, A1080iB, and A720pB cannot be set. When A576pB is set, signal will be output from the [COMPONENT] terminal.

When HDMI is connected

0When AAUTOB is set, signal will be output in the highest format (supports up to A720pB) automatically detected.

0When up convert is not possible, signal will be output in A576pB.

62H EN