JVC DR-MH300BE, DR-MH300SE Recorder (VCR), Dubbing from Video Cassette, F End dubbing, E Start dubbing, connecting the VCR, Dubbing to a DV device, F (VCR) Start playback, MIX, P23]

(This unit) Select the recording deck.

If switching the DV soundCSelect ASound monitor switchB( ), and press ENTER to switch.

SELECT

			d	v
R	DV3500
00	00	00

SOUND1

CONFIRM SOUND1BSOUND2BMIX

0SOUND1: Record with normal (original) stereo sound.

0SOUND2: Record post-recorded sound in stereo.

0MIX: Record both normal stereo sound and post-recording sound.

(Post-recording sound is not available for 16 bit recording)

E Start dubbing.ASelect and confirm on AAuto capturebuttonB ( ).

•Select and confirm on to pause and/ or resume dubbing.

F End dubbing.ASelect and confirm on ARemote controlswitchB ( ), then set to

.

BStop dubbing.

PRESS TWICE

Repeat step D - F if you want to continue dubbing.

Dubbing to a DV device(only programmes recorded in DV mode on the HDD)

Recommended when, after dubbing videos shot using a DV camcorder to the HDD and editing the play list, you wish to store them on a mini DV tape.

ASet the channel to AdvB.

BSelect and play back the programme recorded in DV mode that you wish to dub from the Library Database Navigation.

CCheck if the playback screen appears on the TV connected from the DV device (recording end).

DPause playback on this unit (playback end) at the dubbing start point.

EPause recording on the DV device (recording end).

FStart playback on this unit and recording on the DV device simultaneously.

GWhen dubbing is finished, stop recording on the DV device, then stop playback on this unit.

NOTE:

........................................................

0This operation is not possible when DVD is selected.

Dubbing from Video CassetteRecorder (VCR)

0 See the following page for the connection. ADubbing from DV Camcorder/Video Cassette RecorderB

[	P23]
0 This unit’s on-screen display can be disabled. Setup		Dubbing
Menu ASUPERIMPOSEB = AOFFB [ P102] b
A (This unit) Load a recordable disc.
B	(VCR) Insert a tape to play.
C (This unit) Switch to the input
	connecting the VCR.

0Select AL-2B or AF-1B.

0Press 0 on the remote control to set to AL-2B forcibly.

D

E (This unit) Select the recording mode.F (VCR) Start playback.G (This unit) Start recording.

WHILE HOLDING

H When dubbing is finished, stop recording on this unit, then stop playback on the VCR.

0Dubbing copyright guarded programmes is not possible.

0Recordings made by you, under copyright law, cannot be used without the consent of the right holder other than for personal enjoyment.

When dubbing to Video Cassette Recorder (VCR)

A Play back on this unit.

B Record with the VCR.

0For details, refer to the instruction manual of the VCR.

EN I 71