JVC DT-R24L4D, DT-R17L4D user service Sync Function, Function Setting, Picture SUB ADJ

SYNC FUNCTION

Settings for the synchronization with signals

Item	To do	Setting value
NO SYNC ACTION	Select the screen status when no signal is coming in.	OFF, P.SAVE, GRAY B.
	P.SAVE: power save mode
	GRAY B.: gray screen
DELAY TIME	Select the period until the screen status changes as selected in “NO SYNC	30sec., 5min., 15min.
	ACTION” after signals stop coming in.
LOW LATENCY	Activates/deactivates the function to shorten the time taken to display the	ON, OFF
	picture (low latency function).
	• If the picture is not displayed steadily while “ON” is selected, select “OFF.”
	• While “ON” is selected, the displayed picture may become unstable when
	an operation using buttons on the front panel or the menu is performed, or
	when the signal format changes.

•When setting “NO SYNC ACTION” to “GRAY B.,” the screen color changes to gray and the power consumption of the back light is saved by half. Selecting “P.SAVE” (power save mode) saves more power consumption by turning off the back light.

„SET-UP MENU

FUNCTION SETTING

Settings for the sub menu display, color system, color of the tally lamp, picture size, intensity of the button lamps and the PHASE adjustment.

Item	To do		Setting value
sub menu POSI.	Select the contents and displaying position of “sub menu.”		LOWER1, UPPER1, LOWER2,
	The setting values and features are as follows.		UPPER2
	LOWER1: Displays the current setting and adjustment bar at the lower part
		of the screen.
	UPPER1:	Displays the current setting and adjustment bar at the upper
		part of the screen.
	LOWER2:	Displays the current setting at the lower part of the screen.
	UPPER2:	Displays the current setting at the upper part of the screen.
	• The adjustment bar is not displayed for some items.
COLOR SYSTEM	Select the color system.		AUTO, NTSC, PAL
	• If the picture is unstable with “AUTO,” select “NTSC” or “PAL.”
TALLY SELECT	Select the color of the tally lamp.		GREEN, RED
DIMMER	Select the intensity of the button lamps.		NORMAL, DARK
COMPONENT PHASE	Deactivates the function of PHASE adjustment (Picture adjustment knob		ENABLE, DISABLE
	and “PICTURE SUB ADJ.” in SET-UP MENU) except when an NTSC signal
	comes in (☞ 3 on page 10).
COLOR GAMUT	Setting for the color reproduction range. (DT-R24L4D only)		ITU-709, Adobe
	ITU-709:The monitor displays using a color gamut conforming to ITU-R
	BT.709.
	Adobe: The monitor displays using a color gamut suitable for Adobe RGB.
	The coverage is about 98%.

PICTURE SUB ADJ.

Adjusts the standard level for the picture adjustment and selects the set-up level for the input video signal.

Item	To do	Setting value
CONTRAST*1	Adjust the standard level for the contrast adjusted with the CONTRAST knob	–20 – +20
	on the front panel.
BRIGHT*1	Adjust the standard level for the brightness adjusted with the BRIGHT knob on	–20 – +20
	the front panel.
CHROMA*1	Adjust the standard level for the chroma adjusted with the CHROMA knob on	–20 – +20
	the front panel.
PHASE*1, *2	Adjust the standard level for the phase adjusted with the PHASE knob on the	–20 – +20
	front panel.
NTSC SETUP	Select the set-up level of the input NTSC signal.	00, 7.5
	00: compliant with 0% set-up signal
	7.5: compliant with 7.5% set-up signal
sub menu	Display the sub menu which enables you to adjust the items in “PICTURE SUB ADJ.” while viewing the actual
	picture.
reset	Restore the default settings for all the items in “PICTURE SUB ADJ.”

*1 Memorized for each input.

*2 When “COMPONENT PHASE” is set to “DISABLE” and an NTSC signal is input, PHASE can be adjusted.

EN

15