INFORMATION
Settings for the information display of the monitor
Item | To do | Setting value |
POSITION | Select the position to show the information display (☞ “On the Information | UPPER, LOWER |
| Display” on page 11). |
|
SOURCE ID | Select whether the name assigned in “CHARACTER SET.” is displayed on the | OFF, ON, AUTO |
| screen (☞ “On the Information Display” on page 11). |
|
| • When “AUTO” is selected, the display color synchronizes with the color of |
|
| the tally lamp while the tally lamp is lit. |
|
CHARACTER SET.*1 | Assign a name to each video source as you like (10 characters at maximum). |
|
| You can also enter a name using the |
|
Setting of “CHARACTER SET.”
1Change the input to one that you want to assign a video source name for.
2 Select “CHARACTER SET.”
3Press 
buttons to select the first character.
•Each time you press 
button, the character changes as follows. Press 
button to reverse the order.
Space
|
| 4 Press button to move the arrow to the next space. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| • The characters entered before moving the arrow are memorized. |
|
|
|
|
|
|
|
|
| 5 Repeat steps 3 and 4 (10 characters at maximum). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| 6 Press MENU button to store the name. |
|
|
|
|
|
|
|
STATUS DISPLAY | Select whether the status of the current input and the setting of MUTING are | AUTO, OFF, ON | |||||||
|
| displayed on the screen (☞ “On the Status Display” on page 11). |
|
|
|
|
|
|
|
TIME CODE | Select the type of the TIME CODE display. | VITC*2, LTC*2, | |||||||
CRC ERROR | Select whether the CRC error indication for the input HD SDI signal is | OFF, ON | |||||||
|
| displayed on the screen (☞ “On the Information Display” on page 11). |
|
|
|
|
|
|
|
SUB HOUR METER | Display the hours of use (unit: hour). You can reset this item. |
|
|
|
|
|
|
| |
MODEL | Display the model name of the monitor. |
|
|
|
|
|
|
| |
VERSION | Display the version of the monitor. |
|
|
|
|
|
|
| |
HOUR METER | Display the total hours of use (unit: hour). This item is used for maintenance of the monitor. You cannot reset this | ||||||||
|
| item. |
|
|
|
|
|
|
|
*1 Memorized for each input. |
|
|
|
|
|
|
| ||
*2 Ancillary time code |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
CONTROL LOCK |
| Setting value: OFF, VOL.LOCK, ALL LOCK |
|
|
|
|
|
|
|
Settings for disabling the buttons on the front panel.
•The following operations are not available when “VOL.LOCK” is selected.
–VOLUME adjustment knob
–Picture adjustment knob
•The “ALL LOCK” function disables to control the buttons on the front panel. But following operations are available.
–Turning on/off (on standby) the monitor
–Displaying the 
button while holding 
button) and turning “CONTROL LOCK” to “OFF”
–Operating the monitor by an external control
If you try other operations, “ Control lock on!” appears on the screen.
DVI INPUT SEL. Setting value: AUTO, COMPO., RGB, PC
When “AUTO” is selected, the format of signals come in to the
•Select “COMPO.,” “RGB” or “PC” when the picture is not displayed correctly with “AUTO.”
•
all reset
Restores all the settings and adjustments of the monitor to the default.
•“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.
•After performing “all reset,” the monitor is turned off then turned on automatically.
EN
17
