JVC DT-V1900CG manual  Item Contents and Adjustment RANGE/SETTINGS

ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS

1.APERTURE CONTROL

Compensates the frequency

characteristics of the input						<APERTURE CONTROL>
video signal. Press the				LEVEL			: 00
				CONTROL FREQ.			:HIGH
button to display the setting					sub menu
					reset
menu illustrated on the right.
NOTE : APERTURE
	CONTROL is not			EXIT: MENU ADJUST:- + SELECT:
	displayed when the
	RGB signal is input.
Item		: LEVEL
Adjustment
range	: 00 ~ +10
Function		: Adjusts the compensate value. The higher the
			number is, the larger the compensate value gets.
Item		: CONTROL FREQ.
Settings		: HIGH/LOW/OFF
Function		: Adjusts the frequency compensation.
			HIGH : Compensates the high frequencies.
			LOW : Compensates the low frequencies.
			OFF : Deactivates the aperture compensation.
Item		: sub menu
Adjustment range/
Settings		: Same as LEVEL or CONTROL FREQ.
Function		: Performs the LEVEL or CONTROL FREQ.
			settings in a single-line display. The display
			position depends on the “sub menu POSITION”
			setting.

3. sub menu POSITION

Items	: Selects the display position of the sub menu
	superimposed on the screen.
Settings	: UPPER/LOWER

Functions : UPPER : An adjustment item is displayed on the

top of the screen.

	LOWER : An adjustment item is displayed on the
	bottom of the screen.
4. AREA MARKER
Items	: Selects the size marker for the other screen ratio
	(aspect) used when the screen ratio is 16:9.
Settings	: OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2

Functions : OFF: The marker is not displayed. 16:9/4:3/13:9/14:9: Displays the marker (a white quadrangle) showing the screen size of each aspect ratio.

MODE 1/MODE 2: Displays no markers because these settings will be used for function expansion in the future.

●AREA MARKER is displayed when a 16:9 picture such as 1080i/1035i/720p etc. is displayed or the picture is switched to the 16:9 screen ratio by pressing the ASPECT button.

●To actually display the marker, the AREA MARKER button on the monitor needs to be pressed so that it is illuminated.

ENGLISH

Item	: reset
Function	: Sets the LEVEL and CONTROL FREQ. values to
	factory-preset ones.

16:94:3

2.SLOT CONDITION

Displays the status of the input

cards installed in each of the input card slots. Press the button to display the setting menu illustrated on the right.

<SLOT CONDITION>

INPUT A		: VIDEO-1
INPUT B		: VIDEO-2
INPUT C		: COMPO.
INPUT D		: RGB
INPUT E		: NO SLOT
INPUT F		: NO SLOT
EXIT:
	MENU

14:913:9

Items	: INPUT A:/INPUT B:/INPUT C:/INPUT D:/INPUT
	E:/INPUT F:
Settings	: VIDEO-1/VIDEO-2/COMPO./RGB/SDI 1/SDI 2/
	HD SDI 1/HD SDI 2/HD SDI 1*/HD SDI 2*/NO
	SLOT
Function	: Displays the status of the input cards installed in
	each of the input card slots.

●INPUT A/B corresponds to SLOT 1, INPUT C/D to SLOT 2, and INPUT E/F to SLOT 3.

●VIDEO-1 or VIDEO-2 shows the video input card is installed. COMPO. or RGB shows the component/RGB input card. SDI 1 or SDI 2 shows the SDI input card is installed.

HD SDI 1 or HD SDI 2 shows the HD SDI input card is installed.

HD SDI 1* and HD SDI 2* show the HD SDI input card (compatible with EMBEDDED AUDIO) is installed.

●NO SLOT shows no input cards are installed.

13