JVC DT-V1900CG manual How To Use “Main Menu”,  “Main Menu” Items,  “Main Menu” Screens

HOW TO USE “MAIN MENU”

“MAIN MENU” ITEMS

The following items appear in MAIN MENU.

Items		Functions	Displays
1	APERTURE CONTROL	Compensates the frequency characteristics of the input video signal.	*1
2	SLOT CONDITION	Displays the status of the input cards installed in each of the input card slots.
3	sub menu POSITION	Selects the display position of the sub menu superimposed on the screen.
4	AREA MARKER	Selects the size marker for the other screen ratio used when the screen	*2
		ratio is 16:9.
5	AREA MARKER-R	Selects the size marker for the other screen ratio used when the screen ratio is	*2
		16:9. (for external control)
6	CENTER MARKER	Makes the centre marker appear or disappear.	*2
7	COLOR MATRIX	Selects or adjusts the picture colour matrix.	*1

About “Displays” *1: Not displayed when an RGB signal is input.

*2: Displayed only when the screen ratio is 16:9. Not displayed when an RGB signal is input. When some items are not displayed depending on the input signals, subsequent items will move up.

“MAIN MENU” SCREENS

<MAIN MENU>

APERTURE CONTROL

SLOT CONDITION

sub menu POSITION :LOWER

AREA MARKER	:OFF
AREA MARKER-R	:OFF
CENTER MARKER	:OFF
COLOR MATRIX

EXIT: MENU ENTER:+ SELECT:

<MAIN MENU>

APERTURE CONTROL

SLOT CONDITION

sub menu POSITION :LOWER COLOR MATRIX

EXIT: MENU ENTER:+ SELECT:

The menu screen when the screen ratio is 4:3

<APERTURE CONTROL>

LEVEL	: 00
CONTROL FREQ.	:HIGH
sub menu
reset

EXIT: MENU ADJUST:-+ SELECT:

<SLOT CONDITION>

INPUT A		: VIDEO-1
INPUT B		: VIDEO-2
INPUT C		: COMPO.
INPUT D		: RGB
INPUT E		: NO SLOT
INPUT F		: NO SLOT
EXIT:
	MENU

<COLOR MATRIX>

SELECT :ITU601

EXIT: MENU ADJUST:-+ SELECT:

<MAIN MENU>

SLOT CONDITION

sub menu POSITION :LOWER

EXIT: MENU ENTER:+ SELECT:

The menu screen when an

RGB signal is input

LEVEL:+05

- -+ +

The menu screen when “sub menu” is selected.

<COLOR MATRIX>

SELECT :MANUAL R-Y PHASE : 90 R/B GAIN :0.86 G-Y PHASE : 244 G/B GAIN :0.36

sub menu

reset

EXIT: MENU ADJUST:-+ SELECT:

The menu screen when “MANUAL” is selected.

LEVEL:+05

- -+ +

The sub menu screen when “sub menu POSITION” is set to “UPPER”.

R-Y	PHASE	:+90
- -			+ +

The menu screen when “sub menu” is selected.

12