JVC DT-V1900CG manual English, Status Display, Control Lock, all reset

6.STATUS DISPLAY

Makes the status of the input

signal appear or disappear on the screen. Press the button to display the setting menu illustrated on the right.

<STATUS DISPLAY>

STATUS DISPLAY :ON

1080/1035 :1080

EXIT: MENU ADJUST:-+ SELECT:

7. CONTROL LOCK

Item	: CONTROL LOCK
Settings	: OFF/ON
Function	: Invalidates most of operations on the front panel
	(including menu screen operations).
	OFF : Enables normal operations.
	ON : Invalidates all operations except the power
	switch and CONTROL LOCK.

NOTE: While CONTROL LOCK is set to ON, attempting to perform any operation except power switch and

Item		: STATUS DISPLAY
Settings		: ON/OFF
Function		: Makes the format name appear or disappear
			when signals are input and the signal status
			appear or disappear when the input signal is
			changed.
			ON : The information is displayed.
			OFF : The information is not displayed.
Item	: 1080/1035
Settings	: 1080/1035
Function		: Makes the number of effective scanning lines
			appear or disappear when the HDTV signal is
			input.
			1080 : Sets the number to 1080. (Select when
				the digital HDTV signal is input.)
			1035 : Sets the number to 1035. (Select when
				the analog HDTV signal is input.)

CONTROL LOCK causes the “ Control lock on!” warning to appear on the screen for approx. 3 seconds. (It is possible to operate the power switch and display SETUP MENU.)

When SETUP MENU is displayed while CONTROL LOCK is set to ON, the cursor (4) is located next to CONTROL LOCK and cannot be moved.

8. all reset

Function : Sets all items in SETUP MENU to factory-preset values.

ENGLISH

19