D-Link DI-713P manual Rear Panel, Serial, Reset

Rear Panel

The rear panel features a LAN port, WAN port, Serial port and

Factory Reset button. Refer to the following table for the meaning of each

feature.

Serial	Port used to connect an external analog backup modem.
LPT	Port used to connect a printer
LAN	The RJ-45 Ethernet ports used to connect computers with
1-3	network adapters directly to the DI-713P.
WAN	The RJ-45 Ethernet port labeled WAN is used to connect your
	DI-713P to your DSL or Cable modem.
Reset	Resets the configuration to default settings.
12VDC	Power inlet: DC 12V, 1.2A (minimum)

16