D-Link DI-713P manual Link or Act LED’s do not turn on

Resolution:

§Download and upgrade the latest firmware.

§Make sure the correct firmware has been used while upgrading. Use only the firmware provided on D-Link’s web or FTP sites.

§Use only the power adapter provided.

The Link or Act LED’s do not turn on.

Cause:

§The network cable is not connected.

§The network cable is connected but not the right type, whether it be patch or straight-through.

Resolution:

§Make sure that both ends of the cable are connected.

§Try using another cable.

§If you are using a straight-through cable, try a patch cable and vice-versa.

Sometimes my Broadband Router stops working or locks up.

Cause:

§Someone has attempted to hack into someone on your LAN.

§The Broadband Router has detected harmful data trying to access your LAN.

§The NAT table is full.

Resolution:

§Reboot the Broadband Router by turning the power to the unit off and then on again. Some types of hacker tools use very non-standard data streams. Some of these streams may cause the Broadband Router to

54