Chapter 2 - Hardware Installation

Procedure for Hardware Installation

1.Placement

Your Broadband Router should be placed in a safe and secure location. To ensure proper operation, please keep the unit away from water and other damaging elements. Your Broadband Router can be mounted on a wall or a shelf using the screw-holes located on the bottom of the unit. Self-adhesive rubber feet are provided to stick on the bottom of the unit to protect the surface where you have placed the unit.

2.Setup LAN connection

a.Wired LAN connection: connect an Ethernet cable from your computer’s Ethernet port to one of the LAN ports of the DI-713.

b.Wireless LAN connection: make sure the antennas are in a vertical position (if not, rotate over 90 degrees).

3.Setup WAN connection

Prepare an Ethernet cable for connecting the DI-713 to your cable/xDSL modem or Ethernet backbone. Figure 2-1 illustrates the WAN connection.

12

Page 12
Image 12
D-Link DI-713P manual Procedure for Hardware Installation Placement, Setup LAN connection, Setup WAN connection