D-Link DI-713P manual Troubleshooting, LED’s don’t follow the correct boot-up sequence

Chapter 6 - Troubleshooting

In the event that you are unable to connect to or use your Broadband Router, please refer to the following troubleshooting guide. After each problem description, a possible cause and problem resolution is provided. If this section does not help you fix the problem, go to the D-Link web site (www.dlink.com) for additional troubleshooting tips. If neither of these helps, please contact D-Link Technical Support for additional help. The phone numbers for Technical Support are in the appendix of this manual under D-Link Offices.

Basic Functions

My Broadband Router will not turn on. No LED’s light up.

Cause:

§The power is not connected or the power switch is set to “Off”. Resolution:

§Connect the power adapter to your Broadband Router and plug it into the power outlet.

§Make sure that the power switch is set to “On”.

Note: Only use the power adapter provided with your Broadband Router. Using any other adapter may damage your Broadband Router.

LED’s don’t follow the correct boot-up sequence.

Cause:

§The unit has a corrupt firmware.

§The unit is not receiving the correct voltage from the power supply.

53