Daily Operations / Connections

6

7Front panel DT-V24L1 and DT-V20L1 do not have u, SDI 1 and SDI 2 buttons/lamps (i).

Tally lamp

This lamp is controlled by the tally function

NOTE

“NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work).

of MAKE/TRIG. terminal (“FUNCTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETTING” on page 12 and “External

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control” on page 14).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The illustration of the monitor is of DT-V24L1D.

1Speakers (stereo)

The speakers emit the same audio signal output

from AUDIO ASSIGN (MONITOR OUT) terminals. 8 AUDIO ASSIGN (MONITOR OUT) terminals” on page 8

2VOLUME adjustment knob Adjusts the speaker volume.

3PHASE adjustment knob Adjusts the picture hue.

4CHROMA adjustment knob Adjusts the picture color density.

5BRIGHT adjustment knob Adjusts the picture brightness.

6CONTRAST adjustment knob Adjusts the picture contrast.

7MUTING button

Mutes the sound when a menu screen is not displayed.

To cancel the function, press the button again or turn the VOLUME adjustment knob.

8Menu select buttons ( ¥ ¥¥)

When a menu screen is displayed

\ Selects or adjusts menu items. “Menu Operations” on page 7

When no menu screen is displayed

\Selects the audio channels of EMBEDDED AUDIO (DT-V24L1D and DT-V20L1D only).

“Audio Channel Selection” on page 7

To display the set-up menu

\Press button while pressing button.

“Menu Operations” on page 7

9MENU button

Displays the main menu.

“Menu Operations” on page 7

pCOLOR OFF button/lamp Displays only the luminance signal.

q1:1 button/lamp

Displays the picture in the original resolution of the input signal.

NOTE

This function does not work when the input video signal has higher resolution than the resolution of the panel (DT-V20L1D and DT-V20L1 only).

The aspect ratio of the picture may change depending on the input signal.

wAREA MARKER button/lamp Activates/deactivates the settings of “MARKER SELECT,” “ASPECT SELECT,” “R-MARKER SELECT” and “R-ASPECT SELECT” in “AREA MARKER” (page 10).

NOTE

This function works when the picture is displayed in 16:9 aspect ratio.

The functions do not work when “MARKER SELECT” or “R-MARKER SELECT” is set to “OFF” in “AREA MARKER.”

eSAFETY MARKER button/lamp Activates/deactivates the settings of “ASPECT SELECT,” “R-ASPECT SELECT,” “SAFETY MARKER” and “R-SAFETY MARKER” in “AREA MARKER” (10 page).

NOTE

This function does not work when displaying the picture in the 1:1 mode.

The functions do not work when “SAFETY MARKER” or “R-SAFETY MARKER” is set to “OFF” in “AREA MARKER.”

rSCREENS CHECK button/lamp

Displays only the selected element (R, G, or B) of the video signal.

Each time you press this button, the screen changes in the following order.

Normal screen

Red screen

Blue screen

Green screen

The screen changes as above also when “SCR CHECK” is controlled with MAKE/TRIGGER system (“External Control” on page 14).

tASPECT button/lamp

Changes the aspect ratio of the picture from 4:3 to 16:9.

To return to 4:3, press the button again.

Use this function when the picture of 16:9 aspect ratio is squeezed into 4:3 format signal.

yI / P MODE button/lamp

Selects a proper mode corresponding to the input picture.

Each time you press the button, the mode changes as follows.

The mode changes as above also when

“I / P MODE” is controlled with MAKE/TRIGGER system (“External Control” on page 14).

NOTE

Memorized for each input.

uT.C. (time code) button/lamp

Displays the time data (time code) contained in the SDI signal.

iINPUT SELECT buttons/lamps Selects an input.

SDI 1

: HD/SD SDI (IN 1) terminal

SDI 2

: HD/SD SDI (IN 2) terminal

DVI

: DVI-D (HDCP) terminal

COMPO. / RGB: COMPO. / RGB terminal

VIDEO 1 : VIDEO (INPUT 1) terminal

VIDEO 2 : VIDEO (INPUT 2) terminal

• The lamp for the selected input lights.

o Power lamp

 

Unlit

: The monitor is completely

 

off (the AC plug is not

 

connected).

Lights in Green

: The monitor is on.

Lights in orange

: The monitor is off (standby).

Flashes in orange : The monitor is in the suspend mode.

;Standby button

Turns on and off (standby) the monitor.

NOTE

To disconnect the mains line completely, unplug the AC plug from the wall outlet.

NOTE

This function does not work when displaying the picture in the 1:1 mode.

Page 6
Image 6
JVC DT-V20L1D, DT-V24L1D specifications Daily Operations / Connections