Menu Operations

1 Display the menu.

To display the main menu

\Press MENU button.

To display the set-up menu

\Press button while pressing button.

When the main menu is displayed

Selected item

Operation guide

When the set-up menu is displayed

Selected item

Operation guide

2 Press buttons to select an item, then press button.

Ex.: When “AREA MARKER” is selected

3 Press buttons to select an item,

then press buttons to make adjustments.

4 Press MENU button to return to the previous menu.

Pressing the button again finishes the menu operation.

NOTE

For some items, adjustments will be made by pressing in step 2 .

Audio Channel Selection (DT-V24L1D and DT-V20L1D only)

Select audio channels of EMBEDDED AUDIO signals to output from the speakers (L/R) and MONITOR OUT (L/R) terminals.

1 Press or button to display the screen for audio channel selection.

You cannot display this screen when displaying a menu screen.

Selected item

2 Press buttons to select the left

(L) or right (R).

3 Press buttons to select an audio channel.

NOTE

You can select channels from 12 audio channels.

You have to choose a group of selectable audio channels before the channel selection (“E.AUDIO GROUP” on page 11).

4 Press MENU button to finish the audio channel selection.

About the Status Display

The monitor displays the status information below depending on the settings of the menu and buttons at the top of the screen.

1Audio level meter*

Not displayed when no EMBEDDED AUDIO signal is input or “LEVEL METER ch” is set to “OFF” (“AUDIO SETTING” on page 11).

2Signal format

“NO SYNC” is displayed when no video signal is input.

“Out of range” is displayed for a noncompliant video signal input. When “COLOR SYSTEM” is set to “AUTO” (“PICTURE FUNCTION” on page 11) and the noncompliant video signal is a composite one, “OTHERS” is displayed.

3Setting of “COLOR TEMP.”

“WHITE BALANCE SET.” on page 12

*” is displayed at the end of the indication when “HIGH” or “LOW” is selected in “COLOR TEMP.” and its drive levels or cutoff points are adjusted.

4Displayed when “SYNC INPUT SEL.” is set to “EXT.” (external synchronization)

“ SYNC FUNCTION” on page 11

5Source name entered in “CHARACTER SET.”

“INFORMATION” on page 13

Displayed when “MONITOR NAME” is set to “ON” (“INFORMATION” on page 13).

Displayed in large letters when “STATUS DISPLAY” is set to “OFF” or “AUTO” (“INFORMATION” on page 13).

6Time code*

u T.C. (time code) button/lamp” on page 6

• When the input signal includes no time code, “TC:::: is displayed.

7CRC error indication*

“CRC ERROR” in “INFORMATION” on page 13

• A red square is displayed when an error occurs.

* DT-V24L1D and DT-V20L1D only

If you press INPUT SELECT button of the current input, the information below (2 4 and 8) is displayed in large letters for about three seconds. Then the status information on the left column (1 7) is displayed.

When “STATUS DISPLAY” is set to “AUTO” or “ALWAYS”, the information below is also displayed in the cases below (“INFORMATION” on page 13).

When you change the input

When the signal condition of the current input changes

When turn on the monitor

8Setting of “COMPO./RGB SEL.” or the signal form of DVI input

“COMPO./RGB SEL.” or “DVI INPUT SEL.” on page 10

NOTE

When “STATUS DISPLAY” is set to “OFF” or “AUTO” (“INFORMATION” on page 13), 2 4 are not displayed at the top of the screen.

While displaying any of the status indications except 6 at the top of the screen, the picture is displayed below the status display area.

7

Page 7
Image 7
JVC DT-V24L1D, DT-V20L1D Display the menu, Press buttons to select an item, then press button, Menu Operations