JVC DT-V9L3DY specifications Specifications, General, Input/output terminals

Specifications

7 General

Model name	DT-V9L3D
Type	Multi format LCD monitor
Screen size	Type 9 wide format
Aspect ratio	15:9
LCD panel	9˝ wide, IPS-Pro
Effective screen size	Width: 195 mm
	Height: 117 mm
Number of pixels displayed	800 x 480
Number of colors displayed	16.77 million
Viewing angle (TYP.)	170° (Horizontally), 170° (Vertically)
Brightness	350 cd/m2
Contrast ratio (TYP.)	400:1
Compliant video signal format	☞ “Available signals” on page 9
	HD SDI: BTA S-004B, SMPTE292M
Format	SD SDI:	ITU-R BT.656: 525/625
		SMPTE259M: 525
	EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio output	Internal speaker: 1.0 W
	Operating temperature: 0°C – 40°C
Operating conditions	Operating humidity: 20 % – 80 % (non-condensing)
	* Slightly variable depending on ambient conditions for installation.
Power requirements	AC 220 – 240 V, 50 Hz/60 Hz
	DC 12 – 17 V
Rated current	0.25 A (AC 220 – 240 V)
	1.7 A (DC 12 – 17 V)
	Width:	222.4 mm
External dimensions	Height:	218 mm (at the higher position), 181 mm (at the lower position),
		176 mm (without stand)
(excluding protruding parts)
	Depth:	185 mm (at the higher position), 202 mm (at the lower position),
		116 mm (without stand)
Weight	3.6 kg (with the stand)
	2.7 kg (without the stand)
Accessories	AC power cord x 2, Power cord holder x 1, Screw x 2 (for power cord holder),
	Protective filter x 1, Screw (for protective filter) x 4

7Input/output terminals

		VBS/Y
		Composite signal/analog component (Y) signal input/output:
		1 line, BNC connector x 2
		1 V(p-p), 75 Ω
	VIDEO/COMPONENT	* The input (IN) and output (OUT) terminals are bridge-
	(IN/OUT)	connected (auto termination)
Video		PB, PR
		Analog component (PB, PR) signal input:
		1 line, BNC connector x 2
		0.7 V(p-p), 75 Ω
	E. AUDIO HD/SD SDI (IN 1)	Digital signal input (compatible with EMBEDDED AUDIO signals):
	E. AUDIO HD/SD SDI (IN 2)	auto detection, 1 line, BNC connector x 1
	E. AUDIO HD/SD SDI	Digital signal output (compatible with EMBEDDED AUDIO signals):
	(SWITCHED OUT)	1 line switched out, BNC connector x 1
	AUDIO (IN)	Analog audio signal input:
Audio		1 line, RCA connector x 1,
		500 mV (rms), high impedance
	AUDIO (MONITOR OUT)	Analog audio signal output: 1 line, RCA connector x 2,
		500 mV (rms)
	EARPHONE	Monaural mini jack (3.5 mm in diameter) x 1
External control	REMOTE (MAKE/	☞ “Using the MAKE/TRIGGER system” on page 16
	TRIGGER)
	REMOTE (RS-232C)	☞ “Using the RS-232C system” on page 17

Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Notice on transportation

This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.

•For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products.

•Design and specifications are subject to change without notice.

•All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.

ENGLISH21