Specifications
7 General
Model name | |||
Type | Multi format LCD monitor | ||
Screen size | Type 9 wide format | ||
Aspect ratio | 15:9 |
| |
LCD panel | 9˝ wide, | ||
Effective screen size | Width: 195 mm (7 5/8˝) | ||
Height: 117 mm (4 9/16˝) | |||
| |||
Number of pixels displayed | 800 x 480 |
| |
Number of colors displayed | 16.77 million | ||
Viewing angle (TYP.) | 170° (Horizontally), 170° (Vertically) | ||
Brightness | 350 cd/m2 |
| |
Contrast ratio (TYP.) | 400:1 |
| |
Compliant video signal format | ☞ “Available signals” on page 9 | ||
| HD SDI: BTA | ||
Format | SD SDI: | ||
| SMPTE259M: 525 | ||
|
| ||
| EMBEDDED AUDIO: SMPTE299M, SMPTE272M | ||
Audio output | Internal speaker: 1.0 W | ||
| Operating temperature: 0°C – 40°C (32°F – 104°F) | ||
Operating conditions | Operating humidity: 20 % – 80 % | ||
| * Slightly variable depending on ambient conditions for installation. | ||
Power requirements | AC 120 V, 50 Hz/60 Hz | ||
DC 12 – 17 V | |||
| |||
Rated current | 0.35 A (AC 120 V) | ||
1.7 A (DC 12 – 17 V) | |||
| |||
| Width: | 222.4 mm (8 7/8˝) | |
| Height: | 218 mm (8 5/8˝) (at the higher position), | |
External dimensions |
| 181 mm (7 1/4˝) (at the lower position), | |
| 176 mm (7˝) (without stand) | ||
(excluding protruding parts) |
| ||
Depth: | 185 mm (7 3/8˝) (at the higher position), | ||
| |||
|
| 202 mm (8˝) (at the lower position), | |
|
| 116 mm (4 5/8˝) (without stand) | |
Weight | 3.6 kg (7.9 lbs) (with the stand) | ||
2.7 kg (5.9 lbs) (without the stand) | |||
| |||
Accessories | AC power cord x 1, Power cord holder x 1, Screw x 2 (for power cord holder), | ||
Protective filter x 1, Screw (for protective filter) x 4 | |||
|
Use the Anton Bauer Dionic 90 (mount: QR
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
7Input/output terminals
|
| VBS/Y | |
|
| Composite signal/analog component (Y) signal input/output: | |
|
| 1 line, BNC connector x 2 | |
|
| 1 | |
| VIDEO/COMPONENT | * The input (IN) and output (OUT) terminals are bridge- | |
| (IN/OUT) | connected (auto termination) | |
Video |
| PB, PR | |
| Analog component (PB, PR) signal input: | ||
| 1 line, BNC connector x 2 | ||
|
| ||
|
| 0.7 | |
| E. AUDIO HD/SD SDI (IN 1) | Digital signal input (compatible with EMBEDDED AUDIO signals): | |
| E. AUDIO HD/SD SDI (IN 2) | auto detection, 1 line, BNC connector x 1 | |
| E. AUDIO HD/SD SDI | Digital signal output (compatible with EMBEDDED AUDIO signals): | |
| (SWITCHED OUT) | 1 line switched out, BNC connector x 1 | |
| AUDIO (IN) | Analog audio signal input: | |
Audio |
| 1 line, RCA connector x 1, | |
| 500 mV (rms), high impedance | ||
AUDIO (MONITOR OUT) | Analog audio signal output: 1 line, RCA connector x 2, | ||
|
| 500 mV (rms) | |
| EARPHONE | Monaural mini jack (3.5 mm in diameter) x 1 | |
External control | REMOTE (MAKE/ | ☞ “Using the MAKE/TRIGGER system” on page 16 | |
TRIGGER) | |||
| |||
REMOTE | ☞ “Using the | ||
|
|
|
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or
•For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products.
•Design and specifications are subject to change without notice.
•All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.
21