7Available signals
The following signals are available for this monitor.
Video signals
|
| Signal format shown |
| Input terminal |
|
|
| VIDEO/COMPONENT |
| ||
No. | Signal name | in the status display | E. AUDIO HD/ | ||
|
| (☞ page 7) | VBS | Y/PB/PR | SD SDI*1 |
|
|
| (Composite) | (Analog component) |
|
1 | NTSC*2 | NTSC | √ | — | — |
2 | PAL | PAL | √ | — | — |
3 | B/W50 | PAL | √ | — | — |
4 | B/W60*2 | NTSC | √ | — | — |
5 | 480/60i | 480/60i | — | √ | — |
6 | 480/59.94i*2 | 480/59.94i | — | √ | √ |
7 | 576/50i | 576/50i | — | √ | √ |
8 | 480/60p | 480/60p | — | √ | — |
9 | 480/59.94p | 480/59.94p | — | √ | — |
10 | 576/50p | 576/50p | — | √ | — |
11 | 720/60p | 720/60p | — | √ | √ |
12 | 720/59.94p | 720/59.94p | — | √ | √ |
13 | 720/50p | 720/50p | — | √ | √ |
14 | 1080/60i | 1080/60i | — | √ | √ |
15 | 1080/59.94i | 1080/59.94i | — | √ | √ |
16 | 1035/60i | 1080/60i | — | √*3 | √*3 |
17 | 1035/59.94i | 1080/59.94i | — | √*4 | √*4 |
18 | 1080/50i | 1080/50i | — | √ | √ |
19 | 1080/30psF | 1080/60i | — | √*3 | √*3 |
20 | 1080/25psF | 1080/50i | — | √*5 | √*5 |
21 | 1080/29.97psF | 1080/59.94i | — | √*4 | √*4 |
22 | 1080/24psF | 1080/24psf | — | √ | √ |
23 | 1080/23.98psF | 1080/23.98psf | — | √ | √ |
√: Acceptable
*1 Compatible with EMBEDDED AUDIO signals
*2 When the number of vertical scanning lines of the incoming signal is 483, the picture is displayed with 480 lines. *3 The signal is recognized as 1080/60i.
*4 The signal is recognized as 1080/59.94i. *5 The signal is recognized as 1080/50i.
• Analog component signals are compatible with Y on sync signals.
Attaching the Power Cord Holder
The provided power cord holder prevents accidental disconnection of the AC power cord from the AC IN terminal.
• The power cord holder consists of two parts, a case and a cover.
1 AC IN terminal | 3 |
| Case |
| CAUTION |
CAUTION | Make sure the plug will not be pulled out after the |
Use only the provided screws. | cover is attached to the case. |
2 | To detach the cover |
Cover |
|
9
