Operation guide
Shows the buttons for each operation.
•The menu automatically disappears in about 30 seconds after the previous operation.
•Some items may not appear on the menu depending on the input or the input signal.
•The items controlled by the MAKE system do not appear on the menu.
NOTE
Example of the wave form monitor
Ex.: When “MARKING” is set to “ON” and “LEVEL” is set to “080”
Red | White |
• The wave which goes over the value set on “LEVEL” is indicated in red.
| Video signal |
Start | End |
WAVE FORM SETTING
Settings for the wave form monitor
Item | To do | Setting value | |
POSITION | Select the position of the wave form monitor. | 1 (lower right), 2 (lower left), 3 (upper left), | |
|
|
| 4 (upper right) |
GAIN | Adjust the gain level for the incoming wave form | ||
|
| data. |
|
OVER LEVEL | Select the over level for the incoming luminance | ☞ “NOTE” | |
|
| signals. |
|
| MARKING | Activates/deactivates the function to change the | OFF, ON |
|
| color of a wave form when the signal exceeds the |
|
|
| limit specified on “LEVEL” (☞ below). |
|
| LEVEL | Adjust the lower limit for the luminance signal | 070 |
AUTO OFF | Activates/deactivates the function to make the | ON, OFF | |
|
| wave form monitor indication go off automatically |
|
|
| 15 minutes after displaying it. |
|
SYNC FUNCTION
Settings for the synchronization with signals
Item | To do | Setting value |
NO SYNC ACTION | Select the screen status when no signal is | OFF, |
| coming in. | P.SAVE (power save mode), |
|
| GRAY B. (gray screen) |
DELAY TIME | Select the period until the screen status | 30sec., 5min., 15min. |
| changes as selected in “NO SYNC ACTION” |
|
| after signals stop coming in. |
|
•When setting “NO SYNC ACTION” to “GRAY B.,” the screen color changes to gray and the power consumption of the back light is saved by half.
Selecting “P.SAVE” (power save mode) saves more power consumption by turning off the back light.
CLOSED CAPTION Setting value: OFF, CC1, CC2
Selects the type of closed caption for analog composite signals (NTSC and B/W60 only).
• Regardless of the setting, the closed caption is not displayed when the wave form monitor is displayed.
13