Menu
Operation guide
Shows the buttons for each operation.
•The menu automatically disappears in about 30 seconds after the previous operation.
•Some items may not appear on the menu depending on the input or the input signal.
•The items controlled by the MAKE system do not appear on the menu.
12
AUDIO SETTING
Settings for the level meter
Item | To do | Setting value |
BAR POSITION | Select the type of the level meter display | VERT. (vertically), HORZ. (horizontally) |
| — vertically or horizontally. |
|
LEVEL METER ch | Select the number of the audio channels | OFF, 12CH, 8CH |
| displayed on the level meter. |
|
CH ARRANGE | Select the order of the audio channels | LINE, DIVIDE (☞ “NOTE”) |
| displayed on the level meter. |
|
BAR TYPE | Select the color of the level meter display. | 3COLORS (3 colors to indicate variations in |
|
| input levels), W.100 (white), W.50 (half tone) |
REFERENCE LEVEL | Select the standard input level indicated on the | |
| level meter. |
|
OVER LEVEL | Select the input level’s lower limit indicated in | |
| red for the “3COLORS” display. |
|
BAR BRIGHTNESS | Select the brightness of the level meter. | LOW, HIGH |
NOTE
Example of the level meter
Ex.: When “LEVEL METER ch” is set to “8CH” and “BAR TYPE” is set to “3COLORS.”
REFERENCE LEVEL OVER LEVEL
Red | Green |
| Yellow |
Ex.: BAR POSITION: HORZ.,
CH ARRANGE: LINE
OVER LEVEL
Red
Yellow
Green
REFERENCE LEVEL
REFERENCE LEVEL |
|
| ||
OVER LEVEL |
| • When “CH ARRANGE” is set | ||
|
|
| to “DIVIDE,” odd channels are | |
|
|
| displayed on the left and even | |
Red | Green |
| channels are displayed on the | |
| right. | |||
| Yellow |
| ||
| • When “BAR TYPE” is set | |||
Ex.: BAR POSITION: HORZ., | ||||
| to “W.100” or “W.50,” the | |||
CH ARRANGE: DIVIDE |
| |||
| standard input level set in | |||
|
|
| ||
| OVER LEVEL |
| the “REFERENCE LEVEL” | |
|
| is displayed with the line | ||
| Red |
| ||
| Yellow |
| indication. The input level set in | |
|
| “OVER LEVEL” is not displayed. | ||
| Green |
| ||
| • | The level meter with no signal | ||
|
| |||
|
|
| input is displayed in white for | |
|
|
| “3COLORS,” and in gray for | |
REFERENCE LEVEL |
| “W.100” or “W.50.” |
Ex.: BAR POSITION: VERT., | Ex.: BAR POSITION: VERT., |
CH ARRANGE: LINE | CH ARRANGE: DIVIDE |