JVC G1000S Connector Panel, C S video input terminal Mini DIN 4 pin, RS-232C terminal D-sub 9 pin

Controls and Features (Cont.)

Connector Panel

	w		1	2
	AUDIO		Y/C	VIDEO
q
	PC
p
	AUDIO		AUDIO
	R		L	Y
9	G	H/CS	R	PB/B-Y	3
	B	V		PR/R-Y
	COMPUTER				4
	OUT
			REMOTE	AUDIO OUT
		RS-232C
8	7		6	5

1Y/C (S video) input terminal (Mini DIN 4 pin)

Connect this terminal to the S video output terminal of a VCR, etc.

2VIDEO (composite video) input terminal (BNC) Connect this terminal to the composite video output terminal of a VCR, etc.

3Y, PB/B-Y, PR/R-Y input terminals (BNC)

These are input terminals for component (Y, B-Y, R-Y) signals and Hi-Vision base band (Y, PB, PR) signals. Devices with component signal output terminals for NTSC or Hi- Vision can be connected.

4AUDIO L/R (audio • left/right) input terminals (pin jacks) Of devices connected to the video input terminals, such as a VCR, etc., the audio output terminals of the device to be projected is connected to these terminals. The input audio signal is reproduced by the speakers of the projector. The signal is also output from the AUDIO OUT terminal of the projector.

*When the input signal is stereo signal, connection should be made to both L and R.

*Signals from a monaural device should be connected to only L. That way, the projector’s speakers and the AUDIO OUT terminal produce the same sound from both L and R.

Memo

To select the proper audio input for video input:

The video input terminals (AV IN input terminals) can be switched with the projector’s or remote control’s VIDEO button. However, since this projector has only single audio input terminal, reconnect audio input in accordance with the AV device to be used.

5AUDIO OUT (audio output) terminal (stereo mini jack) Of input signals inputted to the projector, the audio signal of the device being projected is output. Volume should be adjusted using the VOL. (+/–) buttons on the remote control or VOLUME on the setting menu. When a cable is connected to this jack, no audio sound is produced from the projector’s speakers.

6REMOTE terminal (mini jack)

Connect an infrared remote control extension unit, etc. to this jack.

*For details, consult your dealer.

7RS-232C terminal (D-sub 9 pin)

This is a RS-232C interface-specified terminal. This projector can be controlled by a computer connected externally.

*For details, consult your dealer.

8COMPUTER OUT (computer output) terminal (D-sub 3-row 15 pin)

The computer input signal projected on the screen is output. A display unit can be used by connecting it to this terminal.

11

ENGLISH

G1000S 05-14EN 11 98.9.21, 9:46 AM