JVC GC X 3 Rear View, Bottom View, Connectors, EN13, Z pg, Z pg, Z pg, Z pg, Z pg, Z pg, Z pg, Z pg, Z pg, Z pg, Z pg, Z pg. 31, Z pg. 23, 1Viewfinder, Memory card

Rear View

1Viewfinder

Look through here when framing and focusing your shot.

2 DISPLAY button ....................

Z pg. 31, 38

Press this button to turn the LCD screen on and off, and to select the menu display in camera mode and the index display in playback mode.

3 EXE (execute) button .............

Z pg. 23, 53

This button is used to finalize selections on each menu, and also serves as a video playback button.

4 Lock button .................................

Z pg. 23

Hold down this button in order to turn the Power dial.

5 Power dial ...................................

Z pg. 23

Hold down the Lock button and turn this dial to turn the power on and off and to change the mode of the camera.

6 Shoot standby lamp (green) ........

Z pg. 30

The camera is ready to shoot a photo when this lamp changes from flashing to steadily on.

7Connectors cover

Refer to the “Connectors” on the right.

8 Flash standby lamp (red) .............

Z pg. 33

The flash is ready when this lamp changes from flashing to steadily on.

9 LCD screen .................................	Z pg. 15
The photo subject/playback picture is
displayed on this screen.
0 Hand strap/lens cover mount ......	Z pg. 21

This is used to attach the hand strap or a lens cover.

EN13

Bottom View

1 Battery cover ..............................

Z pg. 19

Open this cover to replace the battery.

2 Tripod mount hole ......................

Z pg. 25

Use this hole to mount the camera on a tripod. Use a tripod that does not have a rotation stopper.

3 Memory card cover .....................

Z pg. 22

Open this cover to install/remove a

Memory card.

Connectors

	VIDEO	1
	PRINTER
		2
	DIGITAL
		3

	DC	4

Pull the cover to open.

1 VIDEO output connector ............ Z pg. 61

This is to connect to view picture on a TV.

2 PRINTER output connector .........

Z pg. 62

This is to connect an optional printer (GV- SP2) to the camera via an optional cable.