TROUBLESHOOTINGEN85

This digital still camera contains a microprocessor. The operation of the microprocessor can be disrupted by electronic noise or interference. If this happens, disconnect the power source (battery, AC adapter, etc.) from the camera, and then resume using the camera. If this does not solve the problem, and taking the action described below also does not solve the problem, contact your nearest JVC dealer.

SYMPTOMCORRECTIVE ACTION

PAGE

Power supply

The power does not come on.
c Make sure that the battery is fully charged.

18

c Make sure that the power supply is connected

20

correctly.

 

While shooting

Cannot shoot photos.c Make sure that the Power dial is set to “A” or

26

 

“M”.

 

 

 

 

 

Cannot see the picture on the

c Try turning the power off and then back on again.

26

screen.

 

 

 

 

 

 

Cannot use the menu functions.

c Make sure that the Power dial is not set to “A”.

28

 

 

 

Half pressing the shutter button

c Make sure that there is sufficient light, and make

34

does not focus the camera.

sure that there is enough contrast in your subject.

 

 

 

 

When there is sunlight in the shot,

c This is not a malfunction.

the screen temporarily darkens or

 

becomes black.

 

 

 

 

 

The image on the LCD screen isc Use the ZOOM lever to adjust the brightness of

 

dark, or too white.the LCD screen.

 

 

c You may be playing back a picture in a cold

 

 

location. The LCD screen will appear slightly

54

 

darker when it is cold. This is not a malfunction.

 

 

c The LCD screen may be nearing the end of its

 

 

operational life. Contact your nearest JVC dealer.

 

 

 

 

Memory Full.

c The “MEMORY FULL” message appears when the

 

 

memory is full, making it impossible to take any

 

 

more pictures. Either use a Memory card that has

 

 

some free space in it, or create some free space in

 

memory by saving pictures to a personal

 

 

computer and then deleting those pictures from

 

 

the camera’s memory.

 

 

 

 

Color noise appears in contours of

c This is not a malfunction. There is no problem

the subject on the LCD screen.with the recorded images.

 

 

 

 

The power turned off while

c The power may turn off during flash photography,

 

attempting flash photography.even if the remaining battery power is indicated

 

to be at half of the battery capacity.