Grasp knobs and open.

EN49

Installing the Film Copying Adapter

By installing the provided film copying adapter, you can take photos of images from developed 35mm film (negatives or positives; only those with sleeves).

Turn off the camera before installing the film copying adapter. For details on shooting film, refer to page 50.

5

3

2

1

2 Open the film holder.

3 Insert the film and then close the film holder.

4 Insert the film holder into the slit in the film copying adapter with the picture side facing the lens side of the camera.

5 Insert the film copying adapter into the camera.

•Align on the both sides of the frame with the self timer lamp, and then push the unit all of the way to the back of the lens section.

4

Film copying adapter (provided)

1

Film holder (provided) Compatible with a film including six or less frames

NOTES:

cThe film copying adapter is not compatible with APS film and strips of film that include seven or more frames.

cCheck the orientation of the film.

cBe careful not to scratch the surface of the film.

cWhen shooting, secure the camera on a stable surface (such as a desk).

cWe recommend using video lights, etc., behind the film copying adapter.

cRemove and set slide mount items one at a time.

cRefer to the step 7 on page 51 for the blue film provided with the film holder.