CAUTIONS

EN 91

AC Power Adapter (Optional)

Main Unit

1.To prevent fire, electric shock or injury...

.... DO NOT use the AC power adapter with any power source or voltage not supported.

.... DO NOT modify or disassemble the AC power adapter. Never attempt to repair or check it yourself, as this is very dangerous. Consult your nearest JVC dealer for mainte- nance on the AC power adapter.

.... DO NOT connect any power cord other than the one provided to the AC power adapter. If the power cord's performance or design is different, fire or electric shock may result.

.... first connect the power cord to the AC power adapter. If the power cord is connected first to an AC outlet, and the AC power adapter's connector comes in contact with a metallic object, a short-circuit will occur which may result in fire or injury.

2.To prevent fire, malfunction or electric shock...

.... DO NOT use any AC power adapter except the one specified with this digital still camera. If the AC adapter's performance or design is different than what the digital camera is designed for, fire, malfunction or electric shocks may result. Before using, thoroughly read the instructions of the digital still camera and the AC power adapter.

1.For safety, DO NOT . . ..... open the camera’s chassis..... disassemble or modify the unit..... allow inflammables, water or metallic objects to enter the unit..... remove the batteries or disconnect the power supply while the power is on.2.Avoid using the unit . . ..... in places subject to excessive humidity or dust..... in places subject to soot or steam such as near a cooking stove..... in places subject to excessive shock or vibration..... near a television set..... near appliances generating strong magneticor electric fields (speakers, broadcasting antennas, etc.).

.... in places subject to extremely high (over 40°C) or extremely low (under 0°C) tempera- tures.

3.DO NOT leave the unit . . ..... in places of over 50°C.

.... in places where humidity is extremely low. (below 35%) or extremely high (above 80%).

.... in direct sunlight..... in a closed car in summer..... near a heater.
3.To avoid malfunction...

.... connect the power cord to the AC power adapter securely. If the power cord is disconnected during use of the camera, shooting or playback may become impossi- ble and the image data may become corrupt.

4.To protect the unit, DO NOT . . ..... allow it to become wet..... drop the unit or strike it against hard objects..... subject it to shock or excessive vibration during transportation..... keep the lens directed at extremely bright objects for long periods.

.... carry it by holding the lens. Be sure to hold the main unit with both hands.

.... swing it excessively when using the hand strap.