EN37

Exposure Control

If the subject is predominantly white, black, red, etc., the resulting picture may be underexposed (too dark). In such a case, it is necessary to use the exposure control to restore the picture to a more realistic image. With this camera, you can make this adjustment by up to +/–2 iris steps in units of 0.5EV (exposure value).

23,4

1

SET

4

OFF M

V

(–2EV)

(+2EV)

1 Turn the Power dial to “M”or “V”.

•Hold the Lock button down while turning the Power dial.

2 Press the Exposure control button (+/–), and then press the w e button within 3 seconds.

•Press the e button to cycle through the following modes:

–2 → –1.5 → –1.0 → –0.5 → 0 → +0.5 → +1.0 → +1.5 → +2.0

(Darker to brighter)

•Press the w button to cycle through the modes in the opposite direction.

3 Point the lens at the subject, position yourself, and half-press the Shutter button.

•The camera will continue to focus on the subject while the button is half-pressed. The shoot standby lamp (green) flashes. •To display the image on the LCD screen

while shooting, press the DISPLAY button.

4 Press the Shutter button all the way to take the picture.