EN47

DR Pro-Still (Wide Range Mode)

The camera can expand its apparent dynamic range by combining different exposures of an extremely high contrast subject.

This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky hands.

4

3

2

4,5

 

 

1

 

 

 

 

 

 

SET 4

OFF M

V

1 Turn the Power dial to “M”.

•Hold the Lock button down while turning the Power dial.

2 Select “DR PRO S” with the MODE switch. •“DR PRO S” appears on the LCD panel.

3 Confirm that the self timer is set to “1 second“.

4 Point the lens at the subject, position yourself, and half-press the Shutter button.

•To display the image on the LCD screen while shooting, press the DISPLAY button.

5 Press the Shutter button all the way to take the picture.

•The shoot standby lamp (green) goes off when the shooting has finished.

NOTES:

cDue to large memory files created when shooting a picture of uncompressed quality in this mode, it is recommended that a Memory Card greater than 16MB be used.

cIt takes a few seconds until the shooting finishes because this mode uses the exposure twice. Do not move the object and the camera until the shooting finishes completely.

cIt is not possible to use the flash.