10
DATE JAN 1.00
TIME AM12:00
A
GETTING STARTED (cont.)

Clock (Lithium) Battery Removal/Insertion

This battery is necessary to operate the clock and to
perform date/time settings.

SWITCH OFF POWER

1
Switch off the unit’s power and remove the power
supply unit.

OPEN COVER

2
Open the clock battery compartment cover while
pressing the release tab.

REMOVE BATTERY (when replacing)

3
Insert a pointed, non-metallic object between the
battery and the compartment ( A) and pull the
battery out.

INSERT BATTERY

4
Ensuring the plus (+) side is up, insert the supplied
lithium battery and push it in.

CLOSE COVER

5
Close the compartment cover until it clicks in place.
NOTE:
See “SAFETY PRECAUTIONS”(
Z
pg. 2) for information
on safe handling of lithium batteries.

Date/Time Settings

SELECT MODE
1
Set the power switch to CAMERA.

SET DATE/TIME

2
Press SET and the month blinks. Press + or – to set
the month. Repeat to set day, year, hour and minute.

START CLOCK

3
Press SET. The blinking stops. The date and time are
both displayed for confirmation, then the time
display disappears.
NOTE:
The clock does not keep time while the date and time are
blinking.
–/+ SET
POWER
Time
12-hour indication with AM or PM
TIME .... Time setting is performed
Date
Month/Day/Year
DATE ... Date setting is performed