Audio dubbing indicator
Viewfinder
Mic
REW
PLAY
PAUSE
AUDIO DUB
RM-V20U (optional)
37
Audio Dubbing
You can record a new soundtrack on a prerecorded tape (normal audio only).
**Perform steps 1, 2 and 3 of the Insert Editing procedure (☞ pg. 36) before continuing.
FIND EDIT-IN POINT
1 Press REW to go a little beyond the beginning of the scene onto which you want to dub new audio, press PLAY to view the recorded tape, then press PAUSE at exactly the point where dubbing should start.
ENGAGE AUDIO DUB STANDBY MODE
2 Press and hold AUDIO DUB, and press PAUSE.
BEGIN AUDIO DUBBING
3 Press PLAY. When the counter reaches “0:00:00”, Audio Dubbing stops automatically and the camcorder enters the playback mode.
NOTES:
●Audio Dubbing may not work correctly if the tape contains blank segments, or if the recording speed was changed during the original recording.
●If the camcorder’s mike is too close to the TV, or if the TV’s volume is too high, whistling or howling may occur.
