JVC GR-AXM1U manual Playback Basic Connections, Connect Camcorder to VCR, Vcr

PLAYBACK Basic Connections 33

To AUDIO	Audio and Video
and VIDEO
connectors	cables (optional)

A	B
	To AUDIO and
	VIDEO IN
	connectors
VCR

There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

Connection To A VCR [A] (Editing, Dubbing and Playback)

NOTE:

Use the optional Audio and Video cables.

CONNECT CAMCORDER TO VCR

1 As shown in the illustration on the left, connect the optional Audio and Video cables between the AUDIO and VIDEO connectors on the camcorder and those on the VCR.

SUPPLY POWER

2 Turn on the camcorder, the VCR and the TV.

SELECT MODE

3 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode or channel 3 or channel 4.

Aerial

RF unit RF-V5U(optional)

Connection To A TV With A/V Input

Connectors [B] (Playback ONLY)

	NOTE:
	Use the optional Audio and Video cables.
To AUDIO, VIDEO and	CONNECT CAMCORDER TO TV
	As shown in the illustration on the left, connect the
DC OUT connectors	1 optional Audio and Video cables between the
	AUDIO and VIDEO connectors on the camcorder
	and those on the TV.

NOTES:

●It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack.

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s power switch to CAMERA, then set your TV to the appropriate input mode.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

SELECT MODE

2 Set the TV to its VIDEO or AV mode (as specified in its instructions).

Connection To A TV With NO A/V Input Connectors (Playback ONLY)

NOTE:

Use the optional RF-V5U RF unit.

*Refer to the RF-V5U instruction manual for connection procedure.