INDEX LCD monitor/Viewfinder 
EN 43
1* 2* 3 4 5 6* 7
8
9
0
!
@
#
$
18MIN | DISP. | T30 | %* |
REC SP | SEPIA |
| ^ |
|
| & | |
| LENS COVER | – 05 | |
| * | ||
FADE |
| MWB | |
1MIN | PAUSE |
| ( |
|
| ) | |
1/2S |
|
| |
|
|
|
|
|
|
| TAPE END |
|
|
|
| q | ||
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| |||
|
|
| MERRY CHR ISTMAS |
|
|
| w | ||||
|
|
|
|
|
| ||||||
|
| DEC 25. 97 | AM 10 : 24 |
|
|
| |||||
LCD monitor/Viewfinder Indications
1 * Cassette Warning/Remaining | ☞ pg. 15 | ||
Tape Time | |||
When no cassette is inserted or when Erase | |||
Protection tab is not in the position that allows | |||
recording, the Cassette ( |
| )Warning blinks. | |
| |||
Otherwise, the Remaining Tape Time is |
| ||
displayed. |
| ||
2 * Recording Mode (SP/EP) Indicator .... | ☞ pg. 12 | ||
3, 9 PROGRAM AE Indicator | ☞ pg. 20 | ||
Displayed at 3 for approx. 1 second when the PROGRAM AE select dial is switched from one position to another. Then only the indicator remains at 9.
4 Program Manager Function | ☞ pg. 24 |
Indication | |
Appears when the PROGRAM AE select dial is | |
set to any position other than AUTO LOCK. | |
5 Lens Cover Warning | ☞ pg. 15 |
6 * Tape Length Display | ☞ pg. 12 |
7 Zoom Level Indicator | ☞ pg. 18 |
8 Recording Indicator | ☞ pg. 15 |
0 | ☞ pg. 24 |
! Interval Time/Recording | ☞ pg. 30 |
Time Indicator | |
@ | ☞ pg. 15 |
# Instant Title Display | ☞ pg. 25 |
$ Date/Time Character Display | ☞ pg. 26 |
%* Battery Pack Remaining Power Indicator Changes as follows according to the battery pack’s remaining power level:
“
”. When the power is almost gone, the indicator blinks, then the unit shuts off. Replace the battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares — 
— does not necessarily mean that the battery pack is fully charged.)
^ Focus Indicator | ☞ pg. 22 |
& Exposure Level Indicator | ☞ pg. 21 |
* White Balance Mode Indicator | ☞ pg. 27 |
( Menu Setting Change Indicator | ☞ pg. 28 |
) Clock Warning |
|
Displayed for about 5 seconds if the clock (lithium) battery is not in place or is exhausted when power is turned on. Also displayed for about 5 seconds when clock battery becomes
exhausted while using the camcorder. |
|
For inserting or replacing the clock | ☞ pg. 10 |
battery | |
q Condensation Warning |
|
When this indication appears, all functions are disabled. Turn the unit off (without removing the power source) for a few hours, and when you turn it on again the indicator should disappear.
w Tape End Display ................................ ☞ pg. 15
Appears when the end of the tape is reached during playback, recording or
*: During recording, pressing DISPLAY lets you remove* indications marked with * from the screen.
