EN
This camcorder’s
c
To AC outlet d1Set the Power Switch to “OFF” while pressing down the Lock Button located on the switch.
2Pull out the Viewfinder fully and tilt it upward fully.
3With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount a.
4Slide down the battery pack until it locks in place b.
5Connect the AC Adapter to the camcorder c.
6Plug the AC Adapter into an AC outlet d.
7The POWER/CHARGE lamp on the camcorder blinks to indicate charging has started.
8When the POWER/CHARGE lamp goes out, charging is finished.
9Unplug the AC Adapter from the AC outlet.
10Disconnect the AC Adapter from the camcorder.
To detach the battery pack...Slide the battery pack up slightly while pressing BATT. RELEASE to detach it.
Battery pack | Charging time | |
|
| |
Approx. 1 hr. 30 min. | ||
|
| |
Approx. 3 hr. | ||
(optional) | ||
| ||
|
| |
Approx. 5 hr. | ||
(optional) | ||
| ||
|
|
NOTES:
●If the protective cap is attached to the battery pack, remove it first.
●During charging, the camcorder cannot be operated.
●Charging is not possible if the wrong type of battery is used.
●When charging the battery pack for the first time or after a long storage period, the POWER/ CHARGE lamp may not light. In this case, remove the battery pack from the AC Adapter, then try charging again.
●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.
Please purchase a new one.
●Using the optional
Perform steps 3 - 5 in “Charging The Battery Pack” in the left column.
Maximum continuous recording timeBattery pack | LCD monitor on | Viewfinder on |
|
|
|
1 hr. 5 min. | 1 hr. 20 min. | |
|
|
|
2 hr. 10 min. | 2 hr. 40 min. | |
|
|
|
3 hr. 55 min. | 4 hr. 50 min. | |
|
|
|
5 hr. 25 min. | 6 hr. 40 min. | |
|
|
|
7 hr. 50 min. | 9 hr. 30 min. | |
|
|
|
* Provided |
|
|