$$￿EN

SYSTEM CONNECTIONS

 

 

Connection To A Personal Computer[A] Using USB cable
To USBTo USB connector

 

 

USB cable (provided)

 

PC

 

OR

[B] Using DV cable

 

 

DV cable

To DV

To DV

(optional)connector

 

Core filter

Core filter

PC with DV connector
[A] Using USB cable

It is possible to do the following things:

●Transfer still images stored on a memory card to a PC.

●Transfer still/moving images recorded on a tape to a PC.

●Capture still/moving images in real-time.

●Use this camcorder as a WebCam. ( pg. 67)

[B] Using DV cable

It is also possible to transfer still/moving images to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.

●The software operation manual is provided as PDF file on the CD-ROM.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack.

( pg. 11)

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●The system may not work properly depending on the PC or capture board you are using.

“USB MODE” and/or “ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while

“ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.