Make Connections

Also refer to page 22.

To S/AV

To S-VIDEO IN*

Editing Extension cable (optional)**

ABTo RemotePAUSE orR.A.EDITCTo PAUSE IN
S/AV/Editing cable (provided)To AUDIO IN,VIDEO IN

VCR

TV

1A A JVC VCR equipped with a Remote PAUSE connector…

…Connect the editing cable to the Remote

PAUSE connector.

B A JVC VCR not equipped with a RemotePAUSE connector but equipped with an R.A.EDIT connector…

…Connect the editing cable to the R.A.EDIT

connector.

C A VCR other than above…

…Connect the editing cable to the remote control’s PAUSE IN connector.

2Insert a recorded tape into the camcorder.

3Set the VIDEO/MEMORY Switch to “VIDEO”.

4Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

5Turn the VCR power on, insert a recordable tape and engage the AUX mode.

● Refer to the VCR’s instructions.

NOTES:

● Before Random Assemble Editing, make sure the

indications do not appear on the TV monitor. If

they do, they will be recorded onto the new tape.

To choose whether or not the following displays

appear on the connected TV…

• Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

( pg. 31, 41) Or, press DISPLAY on the remote

control to turn on/off the date indication.

• Time code

Set “TIME CODE” to “OFF” or “ON”.

( pg. 31, 41)

• Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/

TV”. ( pg. 31, 41)

● When editing on a VCR equipped with a DV input

connector, an optional DV cable can be

connected instead of an S-Video cable and audio/

DISPLAY

video cable.

RM-V717U (optional)

*Connect when your TV/VCR has an S-VIDEO IN connector. In this case, it is not necessary to connect the yellow video cable.

**If necessary, use this cable for connections.