# ￿EN

DUBBING

Dubbing To Or From A VCR

.

To S/AV

S/AV/Editing cable

(provided)

 

A B C D E

VCR

ANot connected

BBlack to S-VIDEO* IN or OUT

TV

C Yellow to VIDEO** IN or OUT

 

 

D White to AUDIO L IN or OUT

 

 

 

 

ERed to AUDIO R IN or OUT

*Connect when your TV/VCR has S-VIDEO and A/V connectors. In this case, it is not necessary to connect the yellow video cable.

**Connect when your TV/VCR has only A/V connectors.

To use this camcorder as a player...

1Following the illustrations, connect the camcorder and the VCR. Also refer to page 22.

2Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”.

3Set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4Turn on the VCR’s power.

5Insert the source cassette in the camcorder.

6Insert the recording cassette in the VCR.

7Engage the VCR’s AUX and Record-Pause modes.

● Refer to the instruction manual for the VCR.

8Press PLAY (4/9) on the camcorder to start playback of the source tape.

9At the point you want to start dubbing, engage the VCR’s Record mode.

10To pause dubbing, engage the VCR’s Record- Pause mode and press PLAY (4/9) on the camcorder.

11Repeat steps 8 – 10 for additional editing. Stop the VCR and camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack.

( pg. 11)

●As the camcorder starts to play your footage, it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV...

•Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 31, 41) Or, press DISPLAY on the remote control to turn on/off the date indication.

•Time code

Set “TIME CODE” to “OFF” or “ON”. ( pg. 31, 41)

•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ TV”. ( pg. 31, 41)

To use this camcorder as a recorder...

1)Perform steps 1 to 3 in the left column.

2)Set “S/AV INPUT” to “A/V. IN” or “S. IN”. ( pg. 31, 40)

3)Set “REC MODE” to “SP” or “LP”. ( pg. 31, 34)

4)Insert the recording cassette in this camcorder.

5)Press the Recording Start/Stop Button to engage the Record-Pause mode. The “ A/V.IN ” or

“ S.IN ” indication appears on the screen.

6)Press the Recording Start/Stop Button to start

recording. The indication rotates.

7)Press the Recording Start/Stop Button again to

stop recording. The indication stops rotating.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analog signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.