"￿￿EN

PLAYBACK MENUS

 

 

Video Menu VIDEOPlayback sound

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on page 31, select “SOUND MODE” or “12bit MODE” from the Menu Screen and set it to the desired parameter.

SOUND MODE (Factory-preset: STEREO )

STEREO : Sound is output on both “L” and “R” channels in stereo.

SOUND L : Sound from the “L” channel is output.

SOUND R : Sound from the “R” channel is output.

12bit MODE

(Factory-preset: SOUND 1)

MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.

SOUND 1: Original sound is output on both “L” and “R” channels in stereo.

SOUND 2: Dubbed sound is output on both “L” and “R” channels in stereo.

NOTES:

●You can also use AUDIO button on the provided remote control ( pg. 57) to change the output sound (without having to access the Playback Menu).

●The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)

●The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.

Synchro adjustment

For details, refer to “For More Accurate Editing” ( pg. 65).

SYNCHRO

(Factory-preset: ±0.0)

Recording mode

Allows you to set the video recording mode (SP or LP) depending on your preference. It is recommended you use “REC MODE” in VIDEO Menu when using this camcorder as a recorder during dubbing. ( pg. 52, 54)

REC MODE

(Factory-preset: SP)

SP / LP

 

NOTE:

“REC MODE” can be set when the Power Switch is set to “PLAY” or “M”.

Dubbing from tape to memory card
COPY

(Factory-preset: OFF)

OFF: When the SNAPSHOT button is pressed during tape playback, the playback image pauses and normal playback will resume after approximately 6 seconds. (The still image is not recorded.)

ON: Enables dubbing of images recorded on a tape to a memory card. ( pg. 55)

Deleting thumbnail images

For details, refer to “To delete thumbnail images” ( pg. 49).

NAVI.DEL.IMAGE SEL. / TAPE SEL. / ALL / RETURNBlank search

Helps find a blank portion of tape when you want to record from the middle of a tape.

For details, refer to “Blank Search” ( pg. 21).

BLANK SRCHEXECUTE / RETURNS-Video/AV input
S/AV INPUT

(Factory-preset: OFF)

OFF: Enables audio and video signal output to a TV, VCR, etc. via the S/AV connector.

( pg. 22, 52)

A/V. IN: Enables audio/video signal input from the S/AV connector. ( pg. 52)

S.IN: Enables S-video/audio signal input from the S/AV connector. ( pg. 52)