#$￿EN

USING THE REMOTE CONTROL UNIT

 

 

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 58)

If you want to perform Random Assemble Editing ( pg. 60 – 65), use the optional RM-V717KITU Remote control kit. It is a set composed of the RM- V717U remote control, the Editing cable* and the Editing extension cable.

*The Editing cable is not required with this camcorder.

Install The BatteryRM-V718U (provided)

The remote control uses one lithium battery (CR2025).

1Pull out the battery holder by inserting a pointed instrument into the slot.

2Insert the battery in the holder, and be sure to have the “+” mark visible.

3Slide the holder back in until you hear a click.

Slot Installing The BatteriesRM-V717U (optional)

The remote control uses two “AAA (R03)” size batteries.

1Remove the battery compartment cover while pushing up the tab as illustrated.

2Insert two “AAA (R03)” size batteries in the correct direction.

3Re-attach the battery compartment cover.

Beam Effective Area (indoor use)

When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is 5 m (16 ft).

NOTE:

 

The transmitted beam may not

 

be effective or may cause

 

incorrect operation when the

 

remote sensor is directly

 

exposed to sunlight or powerful

Remote sensor

lighting.

 

Tab+

– +

–

Insert the minus (–) end first.