1h 01m
PAUSE
Displayed while the captured image is being stored in the memory card.
NAVIGATION Function

The Navigation Function helps you check tape contents by making thumbnail images on a memory card.

Power Switch

Lock Button

Rewind Button (REW (3))

Fast-Forward Button (FF (5))

VIDEO/MEMORY +/- Button

Switch

NAVI STORE Button

 

SELECT/SET Button

 

NAVI Button
To make thumbnail images during video recording automatically

1Load a cassette. ( pg. 15)

2Load a memory card. ( pg. 16)

3Set the VIDEO/MEMORY Switch to “VIDEO”.

4Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.

5Set “NAVIGATION” to the desired navigation storing time. ( pg. 31, 35)

●If the “” indicator appears blinking on the screen, wait until it stops blinking. If it does not stop blinking after a while, check if a memory card is loaded.

6Press the Recording Start/Stop Button to start recording.

● When the recording time is over the navigation time set in step 5, “ ” appears briefly, then the image of the point where recording is started is captured and stored in the memory card as a thumbnail image.

●If the Recording Start/ Stop button is pressed

before “” stops blinking, the image of the

point where the loaded memory card is recognised is captured.

7Press the Recording Start/Stop Button to stop recording.

To make thumbnail images after video recording
manually...

1)Perform steps 1 to 4 above.

2)Set “NAVIGATION” to “MANUAL”. ( pg. 31, 35)

3)After the recording, press NAVI STORE.

•The “ ” indicator appears briefly and the captured image is stored in the memory card as a thumbnail image.

NOTES:

●The remaining number of storable thumbnail images also appears on the screen when it reaches

10 or less. If “REC SELECT” is set to “ /” in DSC Menu, the number shows how many 640 x 480 pixel images can be stored.

●If “5S” is set to “5S” or “Anim.” in MANUAL Menu, the NAVIGATION function will not work properly.

To find scenes on tape using thumbnail images (NAVIGATION Search)

1Load a cassette. ( pg. 15)

2Load a memory card. ( pg. 16)

3Set the VIDEO/MEMORY switch to “VIDEO”.

4Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

5Press NAVI during video playback or stop mode.

● The loaded cassette’s

 

NAV I GAT I ON

NAVIGATION thumbnail

DATE : MAY 2 4

’ 0 3

3 :: 2 9 AM

image screen appears.

TC

: 1 3 : 2 3

: 1 5

 

1

2

 

3

● Press REW (3) to

4

5

 

006

display the previous

 

 

 

 

 

page. Press FF (5) to

 

 

 

 

display the next page.

 

 

 

 

6Press + or – to select the desired image, and press

SELECT/SET.