$&￿EN

DETAILS

 

 

 

 

ITEMSNOTES

V Power ( pg. 10)

● Perform charging where the temperature is between 10°C and 35°C (50°F and

 

95°F). 20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If

 

the environment is too cold, charging may be incomplete.

 

● Charging times are for a fully discharged battery pack.

 

● Charging time varies according to the ambient temperature and the status of the

 

battery pack.

 

● To avoid interference with reception, do not use the AC Adapter near a radio.

 

● Since the AC Adapter processes electricity internally, it becomes warm during use.

 

Be sure to use it only in well-ventilated areas.

 

● The following operation stops charging:

 

•Set the Power Switch to “PLAY”, “A” or “M”.

 

•Disconnect the AC Adapter from the camcorder.

 

•Unplug the AC Adapter from the AC outlet.

 

•Detach the battery from the camcorder.

 

 

V VIDEO

● When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may

RECORDING

be difficult to see. If this happens, use the viewfinder instead.

( pg. 17)

● The cassette holder cannot be opened unless a power supply is attached.

 

● There may be a delay after you open the cassette holder cover until the cassette

 

holder opens. Do not use force.

 

● Once the cassette holder is closed, it recedes automatically. Wait until it recedes

 

completely before closing the cassette holder cover.

 

● When the Recording Start/Stop button is pressed, it may take a few seconds before

 

actual recording starts. The “T” indicator starts rotating when the camcorder

 

actually starts recording.

 

● The time required to calculate and display the remaining tape length, and the

 

accuracy of the calculation, may vary according to the type of tape used.

 

● “TAPE END” appears when the tape reaches its end, and the power goes off

 

automatically if left in this condition for 5 minutes. “TAPE END” also appears

 

when a cassette at its end is loaded.