JVC GR-DV3000A Recording Mode Setting

EN 15

Power Switch

Power Lamp

Lock Button

MENU Wheel

Recording Mode Setting

Set the tape recording mode depending on your preference.

1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully. The power lamp lights and the camcorder is turned on.

2 Press the MENU wheel in. The Menu Screen appears.

3 Rotate the MENU wheel to select “ CAMERA” and press it. The CAMERA Menu appears.

4 Rotate the MENU wheel to select “REC MODE” and press it. The Sub Menu appears. Select “SP” or “LP” by rotating the MENU wheel and press it. Rotate the MENU wheel to select “ RETURN”, and press it twice. The Menu Screen closes.

•Audio Dubbing (
pg. 72) and Insert Editing

(
pg. 71) are possible on tapes recorded in the SP mode.

•“LP” (Long Play) is more economical, providing

1.5times the recording time.

NOTES:

● If the recording mode is switched during recording, the

playback picture will be blurred at the switching point.

● It is recommended that tapes recorded in the LP mode

on this camcorder be played back on this camcorder.

Display

REC MODE – SP LP

Menu Screen

● During playback of a tape recorded on another

camcorder, blocks of noise may appear or there may be

momentary pauses in the sound.

Sub Menu